WiMAX Signal Analyzerfor Anritsu RF and Microwave Handheld Instruments : Fixed WiMAX Signal Analyzer : Fixed WiMAX Demodulator : Pass / Fail Mode
  
Pass / Fail Mode
The Pass / Fail mode allows selection of a user‑defined file that specifies a list of measurements with Pass / Fail criteria. This mode sequences through the appropriate measurements and indicates a pass or fail state based on the criteria. By using Master Software Tools, a custom test list can be created and uploaded into the instrument. All critical measurements can be selected for pass fail testing. The results are displayed in a table format with clear identification of Pass / Fail results, including minimum and maximum thresholds and measured results.
Procedure:
1. Setup the measurement as described in Setup for Fixed WiMAX Demodulator Measurements.
2. Press the Measurements main menu key.
3. Press the Pass / Fail Mode submenu key.
4. Press the Pass / Fail Mode submenu key again to activate the submenu.
5. Press the Select Pass / Fail Test submenu key to view a list of Pass / Fail test definition files.
6. Use the Up/Down arrow keys or the rotary knob to highlight the applicable Pass / Fail test on the list, and press the Enter key to select.
The sample image in Figure: Pass Fail Mode may differ from any image on your instrument.
Pass Fail Mode