 | CC1 through CC5 Select the desired Component Carrier to set up for measurement. See Figure: Component Carrier Menu. TAE Time Alignment Error (TAE) is a measurement of the differential transmission delay between the Component Carriers. The 3GPP specification identifies the limits of the delays for the system to operate properly. Back |
 | CC1 Off On Turns On the Component Carrier. Center Freq Press this submenu key to set the receiver center frequency. Enter the frequency using the keypad, arrow keys, or the rotary knob. When entering a frequency using the keypad, the submenu key labels change to Units: GHz, MHz, kHz, and Hz. In this case, enter the desired value, then press the desired unit submenu key or press Enter to select MHz as the frequency unit. Signal Standard Opens the Standard List Menu. Channel Opens the Channel Editor dialog where you can select a channel number within the range of the selected signal standard. Set CF to Closest Channel Moves the center frequency to the closest frequency that matches a channel number in the current signal standard. BW Displays the Select Bandwidth list, from which you can choose: 1.4 MHz 3 MHz 5 MHz 10 MHz 15 MHz 20 MHz Back |