Electromagnetic Field (EMF) MeasurementsOption 444 : General Information
 
General Information
 
Introduction
Product Information, Compliance, and Safety
Contacting Anritsu
Selecting a Measurement Mode
Connecting the Antenna
Introduction
This Measurement Guide describes Electromagnetic Field (EMF) measurement functions available as Option 444 on Anritsu RF and Microwave Handheld Instruments. Option 444 must be used in conjunction with an Anritsu isotropic antenna, at a frequency range that is within specification of the instrument and antenna used.
EMF test functions are available in the following measurement modes:
Spectrum Analyzer
Over-the-Air LTE and TD‑LTE
Over-the-Air W-CDMA
Note 
Not all instrument models offer every option. Refer to the Technical Data Sheet of your instrument for available options.
Product Information, Compliance, and Safety
Read the Handheld Instruments Product Information, Compliance, and Safety Guide (PN: 10100-00065) for important safety, legal, and regulatory notices before operating the equipment. For additional information and literature covering your product, visit the product page of your instrument on http://www.anritsu.com/ and select the Library tab.
Not all instrument models offer every option. Please refer to the Technical Data Sheet of your instrument for available options.