Connecting the Antenna

1. Connect the antenna RF connector to the Analyzer/RF In port on the instrument. See Figure: Connecting the Anritsu Isotropic Antenna. The antenna connector must be finger tight.

2. Connect the antenna USB connector to one of the USB Type A ports on the instrument.

Connecting the Anritsu Isotropic Antenna

3. Press Measurements>OTA>EMF to start EMF measuring. The instrument displays “Downloading Antenna Factors. Please do not disconnect the Antenna.”

4. When that message goes away, the antenna factors are downloaded and the instrument is ready to commence measuring.


	Anritsu Company 1-800-ANRITSU 10450-00021, Rev. J