3GPP Signal Analyzer Measurement Guide : LTE Signal Analyzer
 
LTE Signal Analyzer
 
Introduction
General Measurement Setups
Antenna Status
LTE RF Measurements
Channel Spectrum
ACLR
Spectral Emission Mask
RF Summary
RF Measurement Setups
LTE Modulation Measurements
Power vs Resource Block (RB)
Constellation
Control Channel Power
Tx Time Alignment
Modulation Summary
Modulation Measurement Setups
LTE Over‑the‑Air (OTA) Measurements
Antenna Status
Scanner
Tx Test
Mapping (Coverage Mapping)
Carrier Aggregation
Measurement Setup
Pass/Fail Tests
LTE Summary
Measurement Setup
LTE Menus
LTE Menus (continued)
LTE Menus (continued)
Freq (Frequency) Menu
Standard List Menu
Amplitude Menu
Setup Menu
Measurements Menu
RF Menu
Modulation Menu
Power vs. Resource Block Menu
Constellation Menu
Control Channel Power Menu
Over‑the‑Air Menu
OTA Scanner Menu
Over‑the‑Air Tx Test Menu
Coverage Mapping Menu
Carrier Aggregation Menu
Component Carrier Menu
Pass/Fail Test Menu
Marker Menu
Power vs Resource Block Marker Menu
Calibrate Menu
Sweep Menu
Measure Menu
Trace Menu
Limit Menu
Other Menus
Introduction
The Long Term Evolution (LTE) Signal Analyzer offers three measurement options:
• RF Measurements
The following display types are provided for RF measurements: Channel Spectrum display, ACLR display, Spectral Emission Mask display, and the RF Summary table.
• Modulation Measurements
Modulation measurements can be viewed in Power vs Resource Block, Constellation display, Control Channel Power display, or the Modulation Summary table.
• Over‑The‑Air (OTA) Measurements
Over‑the‑Air measurements include Scanner, Tx Test, eMBMS Test, Coverage Mapping, and Carrier Aggregation. EMF measurements are available with Option 444.