Digital Television Signal Analyzer Measurement Guide : DVB‑T/H Signal Analyzer : BER Setup (2/2) Menu (Option 57 Only)
 
BER Setup (2/2) Menu (Option 57 Only)
Key Sequence: Measurements > BER > More
BER Setup (2/2) Menu
 
TS Packet
Press this submenu key to open the Select TS Packet list box in order to select one of the following packet settings:
1+[187]+16: Sets the TS packet to 187 bytes.
4+[184]+16: Sets the TS packet to 184 bytes.
Spectrum Reverse
On Off
Press this submenu key to toggle the Spectrum Reverse function On or Off. Use Spectrum Reverse to measure the signal whose sub carrier location is inverted on the frequency axis, such as the IF signal of the transmitter.
TPS warning message (Details)
Press this submenu key to open the TPS warning message (Details) message box. The warning and its description are displayed in the window. If measured TPS parameters are questionable, then look in this message box to check for any warnings.
Back
Press this submenu key to return to the BER Setup (1/2) Menu (Option 57 Only).