DVB‑T/H Signal Analyzer

Digital Television Signal Analyzer Measurement Guide : DVB‑T/H Signal Analyzer

DVB‑T/H Signal Analyzer

Instrument Connections

Digital Television Signal Analyzer Technology

2K, 4K, 8K Modes and Guard Intervals

Hierarchical Modulation

Measurement Functions

RF Measurements

Modulation Analysis Measurements

BER Measurements (Option 57)

Automatic Detection of Parameters

General Measurement Setups

Setting up the Measurement Frequency

Bandwidth Setup

Amplitude Setup

Quick Measurement Setup

DVB-T/H RF Measurements

Spectrum Monitor

Shoulder Attenuation

DVB-T/H Modulation Measurements

Impulse Response

DVB‑T/H BER Measurements (Option 57 only)

Main Menu Group

RF Measurement Menus Group

Modulation Analysis Menus Group

Signal Standard Menu

Reference Level, Input Attenuation, and Preamplifier Setting

Meas Setup Menu

Meas Mode Settings

Advanced Settings Menu

Meas Selection Menu

Marker Description

RF Measurements Menu

Signal Power Menu

Spectrum Monitor Menu

Modulation Analysis Menu

Constellation Menu

Impulse Response Menu

Vertical Range Menu (Impulse Response)

Carrier MER Menu

Vertical Range Menu (Carrier MER)

BER Setup (1/2) Menu (Option 57 Only)

BER Measurement Point

BER Bit Count Setting Menu (Option 57 Only)

BER Setup (2/2) Menu (Option 57 Only)

(Option 64, Option MS8911B‑0050)

Introduction

This chapter describes DVB‑T/H setup and measurement for signal power and signal analysis with Option 64 (or Option MS8911B‑0050) and for Bit Error Rate (BER) testing with Option 57. Note that Option 9 (IQ Demodulation Hardware) may be required in your instrument in order to use Option 57 and Option 64. Digital Video Broadcasting (Terrestrial and Handheld) is abbreviated as DVB‑T/H.

The main menu keys in this instrument mode are:

Frequency Amplitude Setup Measurements Marker

Screen images of measurements, as shown in this document, are examples. The images on your instrument may differ in appearance.