Spectrum Master™ MS271xE User Guide : System Operations : System Menu : System Options Menu
 
System Options Menu
Key Sequence: Shift, System (8) > System Options
System Options Menu
Date and Time
Press this submenu key to display a dialog box for setting the current date and time. Use the submenu keys or the Left/Right arrow keys to select the field to be modified. Use the keypad, the Up/Down arrow keys, or the rotary knob to select the date and time. Press Enter to accept the changes, or press the Esc key to return to normal operation without making changes.
Ethernet Config
This submenu key is present only when Ethernet is installed. Press the key to display the Ethernet submenu and to open the Ethernet Editor dialog box, where you can set the instrument IP address. For details, refer to Ethernet Menu.
Language
Press this submenu key to open a list box and select a built‑in language for the instrument display. Press Enter to apply the change, or press Esc to cancel.
The languages that are currently available are: English, French, German, Spanish, Japanese, Chinese, Korean, Italian, Russian, and Portuguese. You can edit non-English language captions using Master Software Tools (MST). If a mode does not have language translations available, then English is the default language.
Caution: A firmware update or any instrument reset will overwrite modifications you may have made in any of the language files.
Display
The Display submenu key opens the Display Settings Menu, allowing brightness control and the selection of different display attributes.
Name
Press this submenu key to open the Unit Name dialog, where you can enter a name for the instrument, using the touch screen keyboard. Press Enter to save the name.
The assigned instrument name appears in measurement files, setup files, limit line files, and MST reports. It is displayed on the browser page banner when the instrument is connected to a remote PC or mobile device.
Volume
Press this submenu key to view or adjust the speaker volume. The current volume setting is displayed in the Volume input box. Use the numeric keypad, the Up/Down arrow keys, or the rotary knob to change the value, and press Enter to apply the change.
Reset
Press this submenu key to open the Reset Menu.
More
Press this submenu key to open the System Options 2/2 Menu.