BERT Menu

When the configuration is for a DS3 Test Mode with a DS1 Payload Type, the BERT measurement menu offers both DS1 and DS3 Table submenu keys. When the configuration is for a DS3 Test Mode with a Payload Type of 45 Mb, the BERT menus has one Table key.

Key Sequence: Measurements > BERT

DS3 BERT Menu with DS1 Payload

DS1 Table Press this submenu key to display the 10 BERT parameters and their settings in a table format. DS3 Table Press this submenu key to display the DS3 Results table that consists of BPV, Frame Bits, P‑bit Errors, C‑bit Errors, and FEBE Errors. Histogram Press this submenu key once to make it active and to display a histogram of parameters. Press the submenu key again to display the “Histogram Menu”. Event List Press this submenu key to display a chronological event list with 4 columns. The column labels are “Date”, “Time”, “Event Type”, and “Events.” Clear History Press this submenu key to erase the history of displayed events and measurements. Pressing this submenu key also clears any red History indicators in the yellow‑highlighted upper measurement display. Back Press this submenu key to return to the “T3 Measurements Menu”.

 

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com