Field Mode is the default display of the LMR Master when the instrument is turned on for the first time or reset. Field Mode display may be more familiar to users who have experience making Cable and Antenna measurements using the Anritsu LMR Master. Standard VNA display allows the full Vector Network Analyzer functionality of the LMR Master.
Press Shift-8 (System)> Application Options > Meas Menu to toggle between the two views. Figure: Measurement Menu in Field Mode Display and Standard VNA Display shows an example of typical VNA measurements in Field Mode Display and Standard VNA display. Refer to the Vector Network Analyzer Measurement Guide listed in Measurement Guides for detailed information on VNA measurements and the menu differences between the two display structures.
Measurement Menu in Field Mode Display and Standard VNA Display
Select the Measurement Type
Note
The following Quick Start instructions apply to VNA Field Mode. For detailed measurement instructions, refer to the Vector Network Analyzer Measurement Guide P/N 10580-00289, listed in Measurement Guides.
Press the Measure main menu key and then the Measurement Type submenu key. Select a measurement graph and press Enter.
