 | Save Measurement As Press this submenu key to save the current setup with a user defined filename. The default filename is changed using the Save menu. To change the default file name, type in a new file with the touch screen keyboard and press Enter. After a few seconds, the screen returns to File menu. Press the Save Measurement As key again and the new file name is used. Save Measurement Press this submenu key to display the Save Menu and the touch screen keyboard. Measurements can be saved to internal memory or to a USB memory device. The saved measurement can be named by using the touch screen keyboard. By default, measurements are saved to internal memory in a directory named /user. The save destination is set with the Save Location Menu. Save Press this submenu key to display the Save Menu and the touch screen keyboard. Measurements can be saved to internal memory or to a USB memory device. The saved setup, measurement, or JPEG file can be named by using the touch screen keyboard. By default, measurements are saved to internal memory in a directory named /user. The save destination is set with the Save Location Menu. Save on Event Press this submenu key to display the Save On Event Menu. This submenu key is displayed only in LMR Analyzer modes. Recall Measurement Press this submenu key to display the Recall Menu. This menu is for recalling measurements from internal memory or from a USB memory device. Recall Press this submenu key to display the Recall Menu. This menu is for recalling measurement or setup data from internal memory or from a USB memory device. Copy Press this submenu key to display the Copy Menu. The Copy menu is for copying files or folders from internal memory or a USB memory device. Delete Press this submenu key to display the Delete Menu and a selection box that shows the setup and measurement names and the type, date, and time that the information was saved. Use the rotary knob or the Up/Down arrow keys to highlight the file that is to be deleted and press the Delete submenu key, then press Enter. Press the Esc key to cancel the operation. Note that deleted files cannot be recovered. |