Site Masterâ„¢ S331L User Guide : Internal Power Meter
 
Internal Power Meter
 
Overview
Introduction
General Measurement Setup
Connection and Offset
Set the Measurement Frequency
Setting the Amplitude
Changing the Display Units
Displaying Relative Power
Setting Upper and Lower Limits
Average Menu Options
Calibration
Power Meter Menus
Frequency Menu
Amplitude Menu
Calibration Menu
Average Menu
Limit Menu
Sweep Menu
Trace Menu
Other Menus Keys
Overview
This chapter provides an overview of power meter measurements and how to set up the instrument to use the power meter. The power meter displays measured input power at the power meter connector in dBm and Watts or relative power in dB and percentage. No external sensor is required or used. The Power Meter frequency span is fixed to receive RF frequencies from 50 MHz to 4 GHz.
Note 
Check the graph title in the top right of the display to confirm that the instrument is in Power Meter mode. If necessary, press the Menu key to change modes.