This SCPI Programming Manual provides information for remote operation of the MS20xxC Vector Network Analyzer (MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C) using commands sent from an external controller via Ethernet or USB connection. This Programming Manual includes the following:
• An overview of Ethernet and USB connection to the MS20xxC
• An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions
• The IEEE common commands that are supported by the MS20xxC
• A complete listing and description of all the SCPI commands that can be used to remotely control functions of the MS20xxC. These commands are organized by instrument mode and are listed in All Mode Commands.
This manual is intended to be used in conjunction with the VNA Master MS20xxC Vector Network Analyzer User Guide, Anritsu Part Number 10580‑00306. Refer to that manual for general information about the MS20xxC, including equipment setup and operating instructions.
Introduction
This chapter provides a general description of remote programming setup, Ethernet and USB interface connections, and cable requirements.
From here, you can select the latest sales, select service and support contact information in your country or region, provide online feedback, complete a "Talk to Anritsu" form to have your questions answered, or obtain other services offered by Anritsu.
Updated product information can be found on the Anritsu website: