 | Status Press this submenu key to display the current system status, including the operating system and firmware versions, temperatures, and other details such as current battery information. Press Esc or Enter to return to normal operation. Self Test Press this submenu key to run a series of tests that are related to the performance of the motherboard hardware. Press the Esc key to abort, or press the Enter key to continue. The display lists a summary of those tests that have passed. If any test fails, then all of the performed tests are listed with Pass/Fail notification. If the Self Test fails when the battery is fully charged and the instrument is within the specified operating temperature, then contact your Anritsu Service Center (refer to Anritsu Service Centers) and report the test results. Press Esc or Enter to return to normal operation. Application Self Test Press this submenu key to run a series of tests that are related to the performance of the instrument hardware and that are specific to the current instrument application (refer to Mode Selector Menu). Press the Esc key to abort, or press the Enter key to continue. The display lists a summary of those tests that have passed. If any test fails, then all of the performed tests are listed with Pass/Fail notification. If any test fails, then contact your Anritsu Service Center and report the test results (refer to Contacting Anritsu). Some of the hardware that is tested may also be used in different operating modes. One or more additional submenu keys may be displayed to allow running additional application self tests. GPS Press this submenu key to open the GPS Menu. Refer to GPS (Option 31) for additional information. This submenu key is displayed only when Option 31 is installed. Calibrate Touch Screen Press this submenu key to begin touch screen calibration. Additional details and related features are described in Touch Screen Calibration. Application Options Submenu keys are specific to each measurement mode. No menu options are available for PIM Analyzer modes. For other modes, please refer to a specific Measurement Guide, as listed in Other Documents. System Options Press this submenu key to open the System Options Menu. |