1. Press the Freq main menu key to display the frequency menu. Set the Step Size, the desired Intermod Order, and the Span View.
Amplitude Setup
2. Press the Amplitude main menu key to display the Amplitude menu.
3. Press the Reference Level submenu key. The numeric value and units turn red indicating the settings are ready for editing. Enter the desired reference level using the keypad or the Arrow keys. Press Enter.
4. Press the Scale submenu key to change the division of the graticule to a setting other than the default value of 8 dB.
Power and Display Setup
5. Press the Setup main menu key to display the Setup menu.
6. Press the High Output Power or the Low Output Power submenu key to enter the power level of the RF test signal.
7. Press the Test Duration submenu key. Enter the desired test time (time that the RF signal from the PIM Master is On) by using the keypad or the Arrow keys. Then press Enter. The maximum time is 1200 seconds.
Calibration
If calibration is needed, refer to section Calibrating.