VectorStar™ MS464xB Series Microwave Vector Network Analyzer Calibration and Measurement Guide : Calibration and Measurement Overview
 
Calibration and Measurement Overview
 
General Information
Manual Scope
Related Documentation
Product Information, Compliance, and Safety
Contacting Anritsu
Calibration Kits, Verification Kits, and Components
Calibration/Verification Equipment Part Numbers and General Specifications
AutoCal Automatic Calibration Modules
AutoCal Calibrations Available
SOLT Kits (3650x and 3654x)
LRL Kits (3657/3657-1)
Broadband SOLR/SSST kits (3656x and 3659x)
Offset Short Waveguide Kits (3655X)
Microstrip/Coplanar Waveguide Kits for the UTF (36804-XXX)
On-Wafer Calibration Kits
Calibration Algorithms Available
AutoCal
SOLT/SOLR
SSLT
SSST
Broadband SOLT\R-SSST\R
LRL/LRM/ALRM
mTRL
Reciprocal Measurements or Unknown Thru
About Calibration
Match
Directivity
Frequency Response
Calibration Types
Calibration Algorithm Descriptions
Calibration Setup
Frequency Start, Stop, and Number of Points
Harmonic Sweep Setup
IF Bandwidth, Averaging and Power
Types of Calibrations
Full 4-Port
Full 2-Port
Full 1-Port
1-Path 2-Port (Forward or Reverse)
Frequency Response (Transmission and Reflection Frequency Response)
Line Types (Transmission Media)
Preparing a Sliding Load (Termination) Calibration Kit
Procedure
Connector Care
Common Causes of Connector Failure
Coaxial Connector Care
Visual Inspection
Pin Depth
Pin Depth Defined
Pin Depth Limits
Reading Pin Depth
Connector Cleaning Instructions
Required Cleaning Items
Procedure
Torque Specifications and Tools
Connector Types and Cross-Mating Compatibility
General Information
This chapter discusses general calibration requirements and the benefits of different calibration types, algorithms, and routines. General calibration setup and measurement procedures are described. Technical references to Anritsu and other calibration-related articles are also presented where appropriate. Some sections provide cross-references to more detailed explanations and procedures in subsequent chapters.
Manual Scope
The purpose of this Calibration and Measurement Guide is to introduce the basic calibration and operation of the VectorStar™ MS464xB Vector Network Analyzer (VNA) System and reduce the time required to become proficient at performing basic measurements. The procedures in this manual assume a working knowledge of, and a familiarity with, vector network analyzers.
Related Documentation
The latest product information and documentation can be found on the VectorStar product web page:
https://www.anritsu.com/test-measurement/products/ms4640b-series
On this web page, you can select various tabs for more information about your instrument. Included is a “Library” tab which contains links to all the latest technical documentation related to this instrument.
Product Information, Compliance, and Safety
Refer to the VectorStar Product Information, Compliance, and Safety (PICS)—10100-00063 for applicable product information, compliance statements, and safety information, including links to applicable product web pages.
Contacting Anritsu
To contact Anritsu, please visit:
https://www.anritsu.com/contact-us
From here, you can select the latest sales, service and support contact information in your country or region, provide online feedback, complete a Talk to Anritsu form to get your questions answered, or obtain other services offered by Anritsu.