VectorStar™ MS464xB Series Microwave Vector Network Analyzer User Interface Reference : PulseView™ : Application Menu for PulseView and IF Digitizer
 
Application Menu for PulseView and IF Digitizer
Previous
• MAIN Menu
Prerequisites
• Option 35 and Option 42 Installed.
• 2-Port VNA
Navigation
• MAIN | Application | APPLICATION
The APPLICATION menu set for PulseView contains one menu with five variations depending on Pulse Mode, three sub-menus, and one dialog box:
• PulseView APPLICATION menu: Figure: PulseView Setup Menu Variants in Different Pulse Modes
• PulseView CONFIGURATION dialog, Figure: PULSEVIEW CONFIGURATION Dialog Box
Typical APPLICATION menu with related PulseView button is shown in the figure below.
See the other APPLICATION menu chapters for descriptions of other menu button selections.
1. Click the Application button in the VectorStar software menu bar to view the APPLICATION menu.
2. Click the PulseView button to select the pulse measurement application.
3. Click PulseView Setup to access the pulse configuration and measurement parameters.
APPLICATION Menu – PulseView (Option 42) shown; IF Digitizer (Option 35) is required.