LogMag/Phase measurement results are displayed as logarithmic amplitude in dB in the upper window and as phase in degrees in the lower window.
LinMag/Phase measurement results are displayed as linear amplitude in the upper window and as phase in degrees in the lower window.
SWR displays the ratio (with no units) in the upper window only.
Impedance measurement results are displayed as real impedance in the upper window, and as imaginary impedance in the lower window.
Single Display Format
This Vector Voltmeter display shows single measurement results in 2 rectangular windows, as shown in Figure: Single Display Format. Single is the default Display Format setting. For Reflection and Transmission measurements in magnitude and phase formats, the measurement results are displayed as amplitude in the upper window and phase in the lower window.
