 | Calibration Start Calibration: Press this submenu key to display the Step 1 calibration dialog box (see Figure: Calibration Step 1 of 5). Thru Update Press this submenu key to Open the Calibration dialog box to allow calibrating the Thru component without repeating the entire calibration sequence. This key is displayed only after a calibration with a Thru component. Cal Info Press this submenu key to display the Calibration Information table (for an example, see Figure: Cal Info Window). Cal Correction On Off Press this submenu key to toggle the current calibration On or Off. A valid calibration must be available in order to turn on this setting. |
