Opens the file directory to load a saved drive test data set (.log file). This is useful for reviewing test results and documenting hunting excursions. Log files can be opened or appended to existing data to aggregate multiple runs. The log file can also be opened as a playback file. A playback file is like reviewing the gathered data as a movie.
Save Log File (Ctrl+S)
Saves the current drive test data set. If you clear the data, you will not be able to get it back unless it has been saved. Saved data is only useful to reload and review previous interferer hunts.
Export Drive Log to KML
Export a drive test log to a (.kml) file. See Export to KML.
Import Location Estimate
The location files (.loc) were produced by the Anritsu Vision software. The estimated locations are a result of the different techniques used to locate an interferer:
• Angle of Arrival (AoA)
• Power on Arrival (POA)
• Time Difference of Arrival (TDOA)
Once imported, the data from .loc files will be displayed on the Drive Map Display. Use this information to create a drive route.
Capture Screen (Ctrl+C)
Captures the current map display and saves it to the directory folder labeled Anritsu ScreenShots. The captured screen is in PNG format and labeled with the date and time stamp.
Note
The Anritsu ScreenShots folder is created during the installation of Mobile InterferenceHunter and is placed in the My Documents folder.
Screen Capture Folder
Opens the file directory containing all of the captured screens. The directory folder is labeled Anritsu ScreenShots.
Save Current Settings
Opens the Save As window. Name the file and click Save. The file extension.mih, will be added to the end of the name given. Most MIH settings and key instrument settings are saved.
Recall Saved Settings
Opens the Open window containing all of the configuration settings files. These MIH files are located in the default directory folder, My Documents.
Recent Settings
Opens a list of up to 10 previously saved Settings files.
Save Setup on Spectrum Analyzer
Initiate a save setup on the instrument from the MIH software. Click to open the Filename dialog and enter a name for the setup file to be saved on the instrument. After the setup name has been entered, click OK.
Recall Setup on Spectrum Analyzer
Use this command to load a setup on the instrument for measurement testing. Click to open the Select a Setup File dialog. A list of Setup files on the instrument is displayed. Click the desired setup file then click the Load button.
Licensing
Opens a list of commands related to instrument licenses:
• View Licenses (Ctrl+V): Opens the About Anritsu Mobile InterferenceHunter dialog. It contains the lists of single instrument license keys and/or network license keys currently in use.
• Import Machine License(s): Click to import a single instrument license key.
• Export Licenses: Creates a file containing all of the licenses on that PC that can be imported to another PC. Note that a license can be associated with only one Anritsu instrument.
Exit
Closes the Mobile InterferenceHunter program. Any data collection not saved will be erased at this time.