This SCPI Programming Manual provides information for remote operation of the PIM Master MW82119B, Passive Intermodulation (PIM) Analyzer, using commands sent from an external controller through an USB or Ethernet connection.
This Programming Manual includes the following:
• An overview of the USB and Ethernet connections to the instrument.
• An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions.
• The IEEE common commands that are supported by the instruments.
• A complete listing and description of all the SCPI commands that can be used to remotely control functions of the instrument. The commands are organized by measurement mode starting in All Modes Programming Commands.
This manual is intended to be used in conjunction with the PIM Master MW82119B User Guide. Refer to the instrument User Guide for general information about the instrument, including equipment setup and operating instructions.
Introduction
This chapter provides a general description of remote programming setup and interface using USB or Ethernet, and sending SCPI commands to the instrument.