Vision™ MX280001A Software Help : Trace Monitor/Trace Viewer : Trace Monitor Program : Network Health Check Report
 
Network Health Check Report
The Vision Health Check Report provides a target receiver identification and operational status report. From the Report menu, click the Network Health Check Report. The Network Health Check Report appears as shown in Figure: Network Health Check Report.
Network Health Check Report
The Vision Health Check Report columns are described in Table: Vision Health Check Report Description.
Vision Health Check Report Description
Column Name
Description
Monitor Name
A list of the active monitor names from the Remote Monitor List. The order of the monitors listed appear in the order they respond to the Health Check ping.
Model/Options
A list of the target receiver model number and the options installed in each monitor.
Serial Number
A list of the Serial Numbers that identify each monitor.
Firmware Version
A list of firmware versions of each monitor.
GPS
A list that displays the GPS connection status. Good Fix indicates the monitor is connected to GPS. NO Fix indicates the GPS connection is poor or none.
Response Time
A list of the Monitors Response Time. Typically in the 10s to 100 ms.
Busy
A list indicating if Monitor is available for remote control:
Open: indicates available,
Busy: indicates someone else is using the target receiver,
Error: indicates the target receiver did not respond, likely it is off-line.