To set up a PoA locate measurement, select a channel from the Trace Monitor window as shown in Figure: Monitor #4 Selected.
Monitor #4 Selected
Monitored Area
Refer to Figure: Change PoA Monitor. The selected monitor from Trace Monitor is displayed on the screen as monitor “1” on the PoA map. As default, the closest two monitors are shown and labeled as monitor “2” and monitor “3”. These are the three monitors initially set to measure the interferer signal. The three monitors are enclosed in a red-boundary capture range rectangle used to calculate the interferer location.
Up to three monitors can be selected in the Trace Monitor menu. The red-boundary measurement window encloses the three monitors selected.
Change Measurement Monitors on PoA Map
Click another probe on the PoA map or click a trace display repositions the red-boundary to include the selected monitor. The number of probes displayed on the PoA map can be changed using Application Settings Window and then add monitors using the set the Maximum Number of Probes, Note that only three can be set to make interferer measurements.
Change PoA Monitor
1. Initial PoA Measurement
2. Clicked Monitor / Changed Boundary
PoA Report
The report generated is shown in Figure: PoA Report. The report includes a screenshot of the PoA screen, Report Date, and the Interferer Coordinates. The report can be printed and saved in a user designated folder.
