Open the report template folder location to load a report template file.

Open the Save dialog to save the template file to a user selected file folder.

Clear the template typed entries.

Open the report folder to select a report file.

Type a name for the report. When stored, the file name will be listed by the Report name.

Alternative to color graphs. Use as a printer preference.

Type the title of the report.

Type a name to define the site.

Type a name to define the site location

Import a logo into the program and set the logo alignment to the left top corner or right top corner of the report. The logo should be 80 pixels wide by 40 pixels high to fit on the report. Image can be saved in the following formats - PNG, BMP, GIF, or JPG.

Press the caret to set the logo to align on the report as Top Left, Bottom Right, or Bottom Left.

Type the Work Order Number if applicable. Press the switch on to add the item on the report.

Type the Technician Identification if applicable. Press the switch on to add the item on the report.

Type the Prepared By if applicable. Press the switch on to add the item on the report.

Type in the Approved By if applicable. Press the switch on to add the item on the report.

Displays the generate report progress. Press Config, Setup, and Preview to complete the progress stage of the report.

Use the CONFIG window to add and fill in the report template shown in Figure: Report Generator Stages.

Use the SETUP window to add trace data files that will be available for the generated report.as shown in Figure: Report Generator - Setup.

Use the PREVIEW window to load a report template and view the report as an HTML document.

Use the switch to add or remove from report category.