:CALCulate{1-16}:UFEXtraction:MSTD Subsystem – Network Extraction
The :CALCulate{1-16}:UFEXtraction subsystem commands provide configuration control and execution for MultiStandard (MSTD) D, F, or G network extraction functions. The Universal Fixture Extraction option (Option 021) is required for the :CALCulate{1-16}:UFEXtraction commands.
Calibration Option Subsystems
Related calibration option configuration and control subsystems are:
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:FREQuency <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:FREQuency?
Description
Sets the Line 1 (or 2) reference frequency for loss in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Returns the Line 1 (or 2) reference frequency for loss in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Hz.
Query Parameters
NA
Query Output
<NR3> The output parameter is in Hz.
Range
MPND
Default
0
Syntax Example
:CALC1:UFEX:MSTD:D:LIN1:FREQ 1.0
:CALC1:UFEX:MSTD:D:LIN1:FREQ?
:CALCulate{1-16}:UFEXtraction[:METHod]:MSTD:{D|F|G}
Description
Performs the Network Extraction using MultiStandard Type D (or F or G) Method on the indicated channel.
At a minimum, the following commands must be sent before performing MultiStandard network extraction. This assumes appropriate cal has been completed and is on.
Set paths for necessary output SNP files:
Type D:
Type F
Type G
Perform Line 1 Measurement for D, F, or G
Cmd Parameters
NA
Query Parameters
NA
Query Output
NA
Range
NA
Default
NA
Syntax Example
:CALC1:UFEX:METH:MSTD:D
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:COLLect
Description
Initiates collection of data for Line 1 (or 2) for MultiStandard D (or F or G) Network Extraction on the indicated channel and returns status.
No query.
Cmd Parameters
NA
Query Parameters
NA
Query Output
NA
Range
NA
Default
NA
Syntax Example
:CALC1:UFEX:MSTD:D:LIN1:COLL
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:LENGth
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:LENGth?
Description
Sets the Line 1 (or 2) length in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Returns the Line 1 (or 2) length in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
The input parameter is in meters.
Query Parameters
NA
Query Output
The output parameter is in meters.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:LIN1:LENG 2.5E-10
:CALC1:UFEX:MSTD:D:LIN1:LENG?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:LOSS <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:LOSS?
Description
Sets the Line 1 (or 2) loss value in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Returns the Line 1 (or 2) loss value in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in dB/m.
Query Parameters
NA
Query Output
<NR3> The output parameter is in dB/m.
Range
MPND
Default
0
Syntax Example
:CALC1:UFEX:MSTD:D:LIN1:LOSS 1
:CALC1:UFEX:MSTD:D:LIN1:LOSS?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:MEASure?
Description
Query only.
Returns whether the Line 1 (or 2) has been measured for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
NA
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default
0
Syntax Example
:CALC1:UFEX:MSTD:D:LIN1:MEAS?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:SELect <char>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:SELect?
Description
Sets the Line Selection to be Thru or S2P in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Writing the SCPI command while the dialog is open will cause the radio button to update in real time.
Returns the Line Selection to be Thru or S2P in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<char> THRu | S2P
Query Parameters
NA
Query Output
<char> THRu | S2P
Range
NA
Default
STAN
Syntax Example
:CALC1:UFEX:MSTD:D:LIN1:SEL S2P
:CALC1:UFEX:MSTD:D:LIN1:SEL?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:S2P:PATH <char>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe{1|2}:S2P:PATH?
Description
Sets the file path of the S2P for the Line to be used in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Writing the SCPI command while the dialog is open will cause the radio button to update in real time.
Returns the file path of the S2P for the Line to be used in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<string> Any .s2p file.
Query Parameters
NA
Query Output
<string> Any .s2p file.
Range
NA
Default
NA
Syntax Example
:CALC1:UFEX:MSTD:D:LIN1:S2P:PATH ‘Filename.s2p’
:CALC1:UFEX:MSTD:D:LIN1:S2P:PATH?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe2[:STATe] <char>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:LINe2[:STATe]?
Description
Sets the on/off state the Line 2 option in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Returns the on/off status of the Line 2 in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
ON | OFF | 1 | 0
Query Parameters
NA
Query Output
1 | 0
Range
NA
Default
0
Syntax Example
:CALC1:UFEX:MSTD:D:LIN2 ON
:CALC1:UFEX:MSTD:D:LIN2?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:COLLect
Description
Initiates collection of data for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel and returns status.
No query.
Cmd Parameters
NA
Query Parameters
NA
Query Output
NA
Range
NA
Default
NA
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:COLL
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:LOAD:L <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:LOAD:L?
Description
Sets the inductance value of the load for the Reflect for MultiStandard D (or F or G) Network Extraction to be used on the indicated channel.
Returns the load inductance for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Henrys.
Query Parameters
NA
Query Output
<NR3> The output parameter is in Henrys.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:LOAD:L 5.0E-9
:CALC1:UFEX:MSTD:D:REFL:LOAD:L?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:LOAD:OFFSet <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:LOAD:OFFSet?
Description
Sets the offset length of the load for the Reflect for MultiStandard D (or F or G) Network Extraction to be used on the indicated channel.
Returns the offset length of the Load for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in meters.
Query Parameters
NA
Query Output
<NR3> The output parameter is in meters.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:LOAD:OFFS 2.5e-3
:CALC1:UFEX:MSTD:D:REFL:LOAD:OFFS?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:LOAD:R <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:LOAD:R?
Description
Sets the resistance value of the load for the Reflect for MultiStandard D (or F or G) Network Extraction to be used on the indicated channel.
Returns the load resistance for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Ohms.
Query Parameters
NA
Query Output
<NR3> The output parameter is in Ohms.
Range
MPND (positive number only)
Default
50
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:LOAD:R 7.5E+1
:CALC1:UFEX:MSTD:D:REFL:LOAD:R?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:OPEN:LOSS <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:OPEN:LOSS?
Description
Sets the loss value for the open for the Reflect for MultiStandard D (or F or G) Network Extraction to be used on the indicated channel.
Returns the loss value for the open for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in dB/m.
Query Parameters
NA
Query Output
<NR3> The output parameter is in dB/m.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:OPEN:LOSS 1.0
:CALC1:UFEX:MSTD:D:REFL:OPEN:LOSS?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:MEASure?
Description
Query only.
Queries if the Reflect has been measured for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
NA
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default
0
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:MEAS?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:OPEN:FREQuency <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:OPEN:FREQuency?
Description
Sets the reference frequency for the line loss of the open standard for the Reflect for MultiStandard D (or F or G) Network Extraction to be used on the indicated channel.
Returns the reference frequency for the line loss of the open standard for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Hz.
Query Parameters
NA
Query Output
<NR3> The output parameter is in Hz.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:OPEN:FREQ 1.0
:CALC1:UFEX:MSTD:D:REFL:OPEN:FREQ?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:OPEN:OFFSet <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:OPEN:OFFSet?
Description
Sets the offset length of the open for the Reflect for MultiStandard D (or F or G) Network Extraction to be used on the indicated channel.
Returns the offset length of the Open for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in meters.
Query Parameters
NA
Query Output
<NR3> The output parameter is in meters.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:OPEN:OFFS 1
:CALC1:UFEX:MSTD:D:REFL:OPEN:OFFS?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:S1P:PATH <string>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:S1P:PATH?
Description
Sets the file path of the S1P for the Reflect to be used in MultiStandard D (or F or G) Network extraction on the indicated channel.
Writing this SCPI command while the dialog is open will cause the radio button to update in real time.
Returns the S1P file path for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<string> ' c:\nenffiles\myfile1.s1p'
Query Parameters
NA
Query Output
<string> c:\nenffiles\myfile1.s1p
Range
NA
Default
NA
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:S1P:PATH ' c:\nenffiles\myfile1.s1p'
:CALC1:UFEX:MSTD:D:REFL:S1P:PATH?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:SHORt:FREQuency <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:SHORt:FREQuency?
Description
Sets the reference frequency for loss of the short for the Reflect for MultiStandard D (or F or G) Network Extraction to be used in MultiStandard network extraction on the indicated channel.
Returns the reference frequency for loss of the short for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Hz.
Query Parameters
NA
Query Output
<NR3> The output parameter is in Hz.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:SHOR:FREQ 1.0
:CALC1:UFEX:MSTD:D:REFL:SHOR:FREQ?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:SHORt:LOSS <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:SHORt:LOSS?
Description
Sets the loss value of the short for the Reflect for MultiStandard D (or F or G) Network Extraction to be used in MultiStandard network extraction on the indicated channel.
Returns the loss value of the short for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in dB/m.
Query Parameters
NA
Query Output
<NR3> The output parameter is in dB/m.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:SHOR:LOSS 1.0
:CALC1:UFEX:MSTD:D:REFL:SHOR:LOSS?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:SHORt:OFFSet <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:SHORt:OFFSet?
Description
Sets the offset length of the short for the Reflect for MultiStandard D (or F or G) Network Extraction to be used in MultiStandard D network extraction on the indicated channel.
Returns the offset length of the short for the Reflect for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in meters.
Query Parameters
NA
Query Output
<NR3> The output parameter is in meters.
Range
MPND
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:SHOR:OFFS 2.5e-3
:CALC1:UFEX:MSTD:D:REFL:SHOR:OFFS?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect[:STATe] <char>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect[:STATe]?
Description
Sets the on/off state of the Reflect option in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Returns the on/off status of the Reflect option in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
ON | OFF | 1 | 0
Query Parameters
NA
Query Output
1 | 0
Range
NA
Default
0
Syntax Example
:CALC1:UFEX:MSTD:D:REFL ON
:CALC1:UFEX:MSTD:D:REFL?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:TYPe <char>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:REFLect:TYPe?
Description
Sets the Reflect type (short, open, load, or S1P) to be used in MultiStandard D (or F or G) network extraction on the indicated channel.
Returns the Reflect type for MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
<char> SHORt | OPEN | LOAD | S1P
Query Parameters
NA
Query Output
SHOR | OPEN | LOAD | S1P
Range
NA
Default
SHORT
Syntax Example
:CALC1:UFEX:MSTD:D:REFL:TYP SHOR
:CALC1:UFEX:MSTD:D:REFL:TYP?
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:ZERo:MATCh[:STATe] <char>
:CALCulate{1-16}:UFEXtraction:MSTD:{D|F|G}:ZERo:MATCh[:STATe]?
Description
Sets the on/off status of the selection to neglect fixture match in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Returns the on/off status of the selection to neglect fixture match in MultiStandard D (or F or G) Network Extraction on the indicated channel.
Cmd Parameters
ON | OFF | 1 | 0
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default
0
Syntax Example
:CALC1:UFEX:MSTD:D:ZER:MATC ON
:CALC1:UFEX:MSTD:D:ZER:MATC?
:CALCulate{1-16}:UFEXtraction:MSTD:D:DELay <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:D:DELay?
Description
Sets estimated fixture delay for MultiStandard D Network Extraction on the indicated channel. Note that 0 entry triggers auto-estimation.
Returns the estimated fixture delay for MultiStandard D on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in seconds.
Query Parameters
NA
Query Output
<NR3> The output parameter is in seconds.
Range
Positive
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:D:DEL 2.5E-03
:CALC1:UFEX:MSTD:D:DEL?
:CALCulate{1-16}:UFEXtraction:MSTD:D:PORT:PAIR <char>
:CALCulate{1-16}:UFEXtraction:MSTD:D:PORT:PAIR?
Description
Sets port pair in 4-port MultiStandard D Network Extraction on the indicated channel.
Returns port pair selection in 4-Port MultiStandard D Network Extraction on the indicated channel.
Cmd Parameters
PORT12 | PORT13 | PORT14 | PORT23 | PORT24 | PORT34
Query Parameters
NA
Query Output
<char> PORT12 | PORT13 | PORT14 | PORT23 | PORT24 | PORT34
Range
NA
Default
PORT12
Syntax Example
:CALC1:UFEX:MSTD:D:PORT:PAIR PORT12
:CALC1:UFEX:MSTD:D:PORT:PAIR?
:CALCulate{1-16}:UFEXtraction:MSTD:D:S2P:FILe{1|2} <string>
:CALCulate{1-16}:UFEXtraction:MSTD:D:S2P:FILe{1|2}?
Description
Sets the S2P file 1 (or 2) name which receives the MultiStandard D Extracted Network S2P data on the indicated channel.
Returns the S2P file 1 (or 2) name which receives the MultiStandard D Extracted Network S2P data on the indicated channel.
Cmd Parameters
<string> Filename and path in the form: 'x:\directory\filename.s2p' , where x:\directory must exist.
<string> ' c:\nenffiles\myfile1.s2p' | ' c:\nenffiles\myfile2.s2p'
Query Parameters
NA
Query Output
<string> c:\nenffiles\myfile1.s2p | c:\nenffiles\myfile2.s2p
Range
NA
Default
NA
Syntax Example
:CALC1:UFEX:MSTD:D:S2P:FIL1 ' c:\nenffiles\myfile1.s2p'
:CALC1:UFEX:MSTD:D:S2P:FIL1?
:CALCulate{1-16}:UFEXtraction:MSTD:{F|G}:DPATh <char>
:CALCulate{1-16}:UFEXtraction:MSTD:{F|G}:DPATh?
Description
Sets dominant path in MultiStandard F (or G) Network Extraction on the indicated channel. The dominant path and its partner (e.g., 1-2 implies 3-4 is also dominant) are the low insertion loss paths of the fixture and the ports between which any internal thru standard would be connected.
Returns dominant path in MultiStandard F (or G) Network Extraction on the indicated channel.
Cmd Parameters
PORT12 | PORT13 | PORT14
Query Parameters
NA
Query Output
<char> PORT12 | PORT13 | PORT14
Range
NA
Default
PORT12
Syntax Example
:CALC1:UFEX:MSTD:F:DPAT PORT12
:CALC1:UFEX:MSTD:F:DPAT?
:CALCulate{1-16}:UFEXtraction:MSTD:F:DELay{1|2} <NRf>
:CALCulate{1-16}:UFEXtraction:MSTD:F:DELay{1|2}?
Description
Sets estimated delay 1 (or 2) that corresponds to a first (or second) pair in dominant path for MultiStandard F Network Extraction on the indicated channel. Note that 0 entry triggers auto-estimation.
Returns the estimated delay 1 (or 2) that corresponds to the first (or second) pair in dominant path for MultiStandard F Network Extraction on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in seconds.
Query Parameters
NA
Query Output
<NR3> The output parameter is in seconds.
Range
Positive
Default
0.000000000E+000
Syntax Example
:CALC1:UFEX:MSTD:F:DEL2 2.5E-03
:CALC1:UFEX:MSTD:F:DEL2?
:CALCulate{1-16}:UFEXtraction:MSTD:F:S2P:FILe{1|2|3|4} <string>
:CALCulate{1-16}:UFEXtraction:MSTD:F:S2P:FILe{1|2|3|4}?
Description
Sets the S2P file 1 (or 2 or 3 or 4) name which receives the MultiStandard F Extracted Network S2P data on the indicated channel.
Returns the S2P file 1 (or 2 or 3 or 4) name which receives the MultiStandard F Extracted Network S2P data on the indicated channel.
Cmd Parameters
<string> Filename and path in the form: 'x:\directory\filename.s2p' ,where x:\directory must exist.
<string> ' c:\nenffiles\myfile1.s2p' |' c:\nenffiles\myfile2.s2p' | ' c:\nenffiles\myfile3.s2p' |' c:\nenffiles\myfile4.s2p'
Query Parameters
NA
Query Output
<string> c:\nenffiles\myfile1.s2p | c:\nenffiles\myfile1.s2p | c:\nenffiles\myfile3.s2p | c:\nenffiles\myfile4.s2p
Range
NA
Default
NA
Syntax Example
:CALC1:UFEX:MSTD:F:S2P:FIL1 ' c:\nenffiles\myfile1.s2p'
:CALC1:UFEX:MSTD:F:S2P:FIL1?
:CALCulate{1-16}:UFEXtraction:MSTD:G:PORT:CONFig <char>
:CALCulate{1-16}:UFEXtraction:MSTD:G:PORT:CONFig?
Description
Sets file port assignment to use when saving the second S4P file in MultiStandard G Network Extraction on the indicated channel.
FIRST denotes using the assignment of the first file while CURRent denotes using the current global port assignment (difference is a swap within dominant pairs).
Returns file port assignment in MultiStandard G Network Extraction on the indicated channel.
Cmd Parameters
<char> FIRST | CURRent
Query Parameters
NA
Query Output
<char> FIRST | CURR
Range
NA
Default
FIRST
Syntax Example
:CALC1:UFEX:MSTD:G:PORT:CONF CURR
:CALC1:UFEX:MSTD:G:PORT:CONF?
:CALCulate{1-16}:UFEXtraction:MSTD:G:S4P:FILe{1|2} <string>
:CALCulate{1-16}:UFEXtraction:MSTD:G:S4P:FILe{1|2}?
Description
Sets the S4P file 1 (or 2) name which receives the MultiStandard G Extracted Network S4P data on the indicated channel.
Returns the S4P file 1 (or 2) name which receives the MultiStandard G Extracted Network S4P data on the indicated channel.
Cmd Parameters
<string> Filename and path in the form: 'x:\directory\filename.s4p' , where x:\directory must exist.
<string> ' c:\nenffiles\myfile1.s4p' | ' c:\nenffiles\myfile2.s4p'
Query Parameters
NA
Query Output
<string> c:\nenffiles\myfile1.s4p | c:\nenffiles\myfile2.s4p
Range
NA
Default
NA
Syntax Example
:CALC1:UFEX:MSTD:G:S4P:FIL1 ' c:\nenffiles\myfile1.s4p'
:CALC1:UFEX:MSTD:G:S4P:FIL1?
:CALCulate{1-16}:UFEXtraction:MSTD:G:ZERo:COUPling[:STATe] <char>
:CALCulate{1-16}:UFEXtraction:MSTD:G:ZERo:COUPling[:STATe]?
Description
Sets the on/off state of the selection to neglect fixture near-end coupling terms for MultiStandard G for the indicated channel.
Returns the on/off status of the selection to neglect fixture near-end coupling terms in MultiStandard G Network Extraction on the indicated channel.
Cmd Parameters
ON | OFF | 1 | 0
Query Parameters
NA
Query Output
1 | 0
Range
NA
Default
0
Syntax Example
:CALC1:UFEX:MSTD:D:ZER:COUP ON
:CALC1:UFEX:MSTD:D:ZER:COUP?
1-800-ANRITSU
10450-00040 Rev. AD