:SENSe{1-16}:SOURce{1-4} Subsystem

VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :SENSe{1-16}:SOURce{1-4} Subsystem

The :SENSe{1-16}:SOURce{1-4} subsystem commands are used to configure and control external sources.

Trigger, Hold, and External Source Subsystems

Related trigger, hold, and external source subsystems are:

• :SENSe:HOLD Subsystem

• :SENSe{1-16}:HOLD Subsystem

• :SENSe{1-16}:OFFSet and :OFFset{1-50} Subsystem

• :SENSe{1-16}:SOURce{1-4} Subsystem

• :SOURce:ALL:EXTernal Subsystem

• :SOURce{1-4}:EXTernal Subsystem

• :TRIGger[:SEQuence] Subsystem

:SENSe{1-16}:SOURce{1-4}:EXTernal[:STATe] <char>

:SENSe{1-16}:SOURce{1-4}:EXTernal[:STATe]?

Description

Requires from one to four external sources.

Sets the on/off state of the indicated external source on the indicated channel. Note that the command does not disable the RF output of the external source.

Returns the on/off status of control of the indicated external source on the indicated channel.

Cmd Parameters

<char> 1 | 0 | ON | OFF

Query Parameters

<char> 1 | 0

Range

Default Value

Syntax Example

:SENS1:SOUR1:EXT ON

:SENS1:SOUR1:EXT?

:SENSe{1-16}:SOURce{1-4}:EXTernal:RF[:STATe] <char>

:SENSe{1-16}:SOURce{1-4}:EXTernal:RF[:STATe]?

Description

Sets the state of the indicated External source RF Power on the indicated channel. This affects the final RF Off/On switch on the synthesizer.

Returns the state of the indicated External Source RF Power on the indicated channel.