VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :SOURce:ALL:EXTernal Subsystem
 
:SOURce:ALL:EXTernal Subsystem
The :SOURce:ALL:EXTernal subsystem command is used to control the state of fast triggering for external sources such as signal/function generators.
Trigger, Hold, and External Source Subsystems
Related trigger and hold subsystems are:
• :SENSe:HOLD Subsystem
• :SENSe{1-16}:HOLD Subsystem
• :SENSe{1-16}:OFFSet and :OFFset{1-50} Subsystem
• :SENSe{1-16}:SOURce{1-4} Subsystem
• :SOURce:ALL:EXTernal Subsystem
• :SOURce{1-4}:EXTernal Subsystem
• :TRIGger[:SEQuence] Subsystem
:SOURce:ALL:EXTernal:FTRIGger[:STATe] <char>
:SOURce:ALL:EXTernal:FTRIGger[:STATe]?
Description
Sets the on/off state of the fast trigger mode of the external sources.
Returns the on/off status of the fast trigger mode of the external sources.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:SOUR:ALL:EXT:FTRIG ON
:SOUR:ALL:EXT:FTRIG?