There are two different mixer setup dialog sets are available on the APPLICATION menu shown as two buttons near the bottom of the menu. The first button, provides support for configuring the active channel. The second button provides support for configuring multiple channels as required for the measurements selected. The mixer setup dialog box controls and basic operation are the same on both dialog sets.
Mixer Setup Procedure Variants
The mixer setup dialogs are available on the APPLICATION menu. From a procedure point of view, it is convenient to divide the configuration procedures into four types:
• Single channel mixer setup for linear frequency or log frequency sweep.
The full name of the mixer setup dialog box varies depending on the type of sweep and active channel. The channel number is taken from the currently active channel. See Figure: MIXER SETUP – ACTIVE CHANNEL Main Dialog Variants for comparison examples. The frequency sweep version is the same as the log sweep version.
