S820E Microwave Site Master™ User Guide : VNA Mode : Trace Menu
 
Trace Menu
Key Sequence: Trace (5)
and
Key Sequence: Trace (5) > Trace Display
Trace Menu (1 of 2)
Trace
Copy Trace to Display Memory
Copies the current trace display to memory for use in Trace Math and Trace Display options.
Trace Display
Press to change the display options.
Data Math
Press to change the trace math options. Refer to Trace Menu (continued).


Trace Display

Trace Only
The active trace is displayed (yellow).
Memory Only
The trace that is stored in memory is displayed (purple).
Trace & Memory
If a trace is stored in memory, then the stored trace (purple) and the current active trace (yellow) are both displayed.
 
Trace Menu (continued)
Key Sequence: Trace (5) > Data Math
Trace Menu (2 of 2)
Trace > Data Math






Data Math
Press to change the trace math options. Note that all data math operations are applied to the complex S‑parameter data of the trace or memory.

None
Press this submenu key to display the active trace as it is, with no math functions.
Trace – Mem
Press this submenu key to display the difference between the active trace and the trace in memory by subtracting the trace in memory from the current trace.
Trace + Mem
Press this submenu key to display the results of logarithmic adding of the active trace and the trace in memory.
Trace * Mem
Press this submenu key to set the trace math function to multiply the current trace by the trace that is in memory.
Trace / Mem
Press this submenu key to set the trace math function to divide the current trace by the trace that is in memory.
Other Menus Keys
Refer to Table: Site Master Keypad Functions.