Clicking the Channel Info tab provides the following fields as shown in Figure: Channel Info Tab. PoA on the Channel Info tab page will use the time of the current trace if the user has scrolled back. If the user has not scrolled back, it will look for the maximum power at the set frequency over the most recent 30 traces in order to get the best results. The PoA under the Channel Info tab page in Vision Monitor assumes omni-directional antennas and does not do a search to optimize sectors. The Channel Info PoA has no setup and provides a search result estimate only. For a more sophisticated method for obtaining optimum search results, refer to PoA Settings and Control Panel.

Displays the selected signal parameters.

Click for AM Modulation measurement on Live signal.
(Requires Option 400)

Click for FM Deviation measurement on Live signal. (Requires Option 400)

Click to load a known transmitter list. A list must be previously loaded in order to display a known transmitter location in this field. For more detail on loading a “Known Transmitter” file, see the Loading the Known Transmitter (.lst) File.