Field Master Pro™ MS2090A User Guide : General Information
 
General Information
 
Introduction
Before You Begin
Additional Documentation
Document Conventions
Instrument Description
Available Models
Available Options
Instrument Care and Preventive Maintenance
Ventilation and Cooling
Connector Care
ESD Caution
Calibration and Verification
Contacting Anritsu for Sales and Service
Introduction
The MS2090A Field Master Pro User Guide covers all of the instrument functions and their use. This manual covers the instrument overview, connector panels, and other common features. Instrument notifications and troubleshooting information is covered in Instrument Notifications. Remote programming is covered in the programming manual (PN: 10580-00445). Additionally, the MS2090A Field Master Pro offers Anritsu Remote and Report Tools (ARRT) software that replicates the instrument’s user interface onto your PC/laptop screen. This allows the user to connect with the instrument via Ethernet connection or Wi-Fi. The ARRT software on the remote client facilitates the ability to recall data and perform on-screen measurement analysis without the need to physically access the instrument (refer to ARRT Software).
Before You Begin
• Read the Field Master Pro MS2090A Information, Compliance, and Safety Guide (PN: 10100-00069) for important safety, legal, and regulatory notices before operating the equipment.
• Charge the instrument battery using the supplied battery charger until fully charged.
Note 
The instrument may reboot when the battery charge level is low and external power is removed.
Additional Documentation
Related Manuals
Document Part Number
Description
10100-00069
Product Information, Compliance, and Safety Notices
11410-01000
MS2090A Field Master Pro™ Technical Data Sheet
10580-00418
Vision™ MX280001A Spectrum Monitor Software
10580-00445
MS2090A Field Master Pro™ Programming Manual
10580-00447
Spectrum Analyzer Measurement Guide
Interference Finder (Option 24)
Zero Span IF Output (Option 89)
Gated Sweep (Option 90)
150 MHz Analysis Bandwidth (Option 105)
Coverage Mapping (Option 431)
EMF Measurement (Option 444)
AM/FM Modulation Measurement (Option 509)
10580-00448
150 MHz Analysis Bandwidth (Option 105)
Real-Time Spectrum Analyzer (RTSA) Measurement Guide (Option 199)
Interference Finder (Option 24)
AM/FM Modulation Measurement (Option 509)
10580-00449
5GNR Measurement Guide (Option 888)
GNSS Receiver (Option 31)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
10580-00450
LTE Signal Analyzer Measurement Guide (Option 883)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
10580-00451
Pulse Analyzer Measurement Guide (Option 421)
10580-00489
EMF Meter Measurement Guide (Option 445)
10580-00490
IQ Capture/Streaming Measurement Guide (Options 124/126 and Options 125/127)
10580-00492
High Accuracy Power Meter Measurement Guide (Option 19)
10580-00493
Cable and Antenna Analyzer Measurement Guide (Option 331)
10580-00501
WCDMA FDD Measurement Guide (Option 871)
10580-00504
Channel Scanner Measurement Guide (Option 27)
For additional information and literature covering your product, visit the product page of your instrument and select the Library tab:
http://www.anritsu.com/en-US/test-measurement/products/ms2090a
Document Conventions
The following conventions are used throughout the MS2090A documentation set.
Instrument Identification
When identifying a frequency option for the MS2090A, that option number is appended after the model number; example: MS2090A‑0709.
User Interface
The MS2090A user interface consists of menus, buttons, toolbars, and dialog boxes.
User Interface Navigation
Elements in navigation paths are separated as follows: MARKER > PEAK SEARCH > NEXT PEAK.