Site Master™ MS2085A/MS2089A User Guide : Instrument Messages and Troubleshooting
 
Instrument Messages and Troubleshooting
Introduction
This appendix provides a list of instrument messages and their meaning and procedures for a full system recovery. If any error condition persists, contact your local Anritsu Service Center (http://www.anritsu.com/contact-us).
Site Master displays the following message types:
• Self-Test Messages, indicating self-test pass or fail conditions.
• File Management Messages, relating to the system (3-line icon) menu FILES actions.
• Informational Messages, such as notification of a screen capture.
• Warning Messages, such as an ADC over-range warning.
• Error Messages, such as an internal instrument fault.
Messages have the following display characteristics:
• Transient messages appear briefly and then fade away.
• Persistent messages remain on the display and require user intervention to correct the condition.
• Some messages are logged but not displayed, such as messages in the event log.
• Messages may be displayed either in the toolbar or in a pop-up window.
Procedures to recover from system software faults can be found in System Recovery.
Follow the UDP Discovery Tool Firewall Settings to change the Windows firewall settings if Discovery Tool is unresponsive.
Refer to System Override if the instrument does not respond to SCPI commands and needs to be reset remotely.