VectorStar™ MS4640A SeriesMicrowave Vector Network Analyzer : SCPI Commands : :CALCulate{1-16}:DISPlay:MARKer Subsystem
 
:CALCulate{1-16}:DISPlay:MARKer Subsystem
The :CALCulate{1-16}:DISPlay:MARKer subsystem command toggles the display of all markers on and off.
Marker Subsystems
Related marker configuration, control, and reporting commands are described in the following subsystems:
• :CALCulate{1-16}:DISPlay:MARKer Subsystem
• :CALCulate{1-16}:MARKer Subsystem
• :CALCulate{1-16}:PARameter{1-16}:MARKer Subsystem
• :CALCulate{1-16}:PARameter{1-16}:MSTatistics Subsystem
• :CALCulate{1-16}[:SELected]:MARKer Subsystem
• :CALCulate{1-16}[:SELected]:MARKer{1-13} Subsystem
• :DISPlay Subsystem
 
:CALCulate{1-16}:DISPlay:MARKer:ALL[:STATe] <char1>
:CALCulate{1-16}:DISPlay:MARKer:ALL[:STATe]?
Description
Command turns on/off the display of all markers on the given channel. Query outputs the on/off status of displaying the markers on the channel. Related marker command subsystems are:
• :CALCulate{1-16}:DISPlay:MARKer:ALL[:STATe] <char1>
• :CALCulate{1-16}:DISPlay:MARKer:ALL[:STATe]?
Cmd Parameters
<char1> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output:
<char1> 1 | 0
Range
NA
Default
1
Syntax Example
:CALC1:DISP:MARK:ALL ON
:CALC1:DISP:MARK:ALL?
 
:CALCulate{CHAN,1-16}:DISPlay:MARKer:INOVerlay[:STATe] <char1>
:CALCulate{CHAN,1-16}:DISPlay:MARKer:INOVerlay[:STATe]?
Description
Command turns display marker in rectangular overlay mode on/off on the given channel.
Query outputs display marker in rectangular overlay mode on/off status on the given
channel
Cmd Parameters
<char1> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output:
<char1> 1 | 0
Range
NA
Default
0
Syntax Example
:CALC1:DISP:MARK:INOV 1
:CALC1:DISP:MARK:INOV?