VectorStar™ MS4640A SeriesMicrowave Vector Network Analyzer : SCPI Commands : :SENSe{1-16}:CORRection:COLLect:METHod Subsystem
 
:SENSe{1-16}:CORRection:COLLect:METHod Subsystem
The :SENSe{1-16}:CORRection:COLLect:METHod subsystem command sets the calibration method for the indicated channel. When configuring the instrument calibration this option must be set first, generally followed by line type, and finally calibration type. Optionally, these commands are followed by coefficient and characterization commands for user-defined calibration devices and kits.
Calibration Setup Subsystems
These subsystems are used during various phases of calibration configuration setup:
• :CALCulate{1-16}:IMPedance:TRANsformation Subsystem
• :CALCulate{1-16}:REFerence Subsystem
• :SENSe{1-16}:CORRection:COLLect:METHod Subsystem
• :SENSe{1-16}:CORRection:COLLect:MICrostrip Subsystem
• :SENSe{1-16}:CORRection:COLLect:MULTIple Subsystem
• :SENSe{1-16}:CORRection:COLLect Subsystem
• :SENSe{1-16}:CORRection:COLLect:WAVeguide Subsystem
• :SENSe{1-16}:CORRection:COLLect[:CALa]:PORT Subsystem
• :SENSe{1-16}:CORRection:ISOLation Subsystem
• :SENSe{1-16}:CORRection:STATe Subsystem
 
:SENSe{1-16}:CORRection:COLLect:METHod <char1>
:SENSe{1-16}:CORRection:COLLect:METHod?
Description
The command sets the calibration method for the indicated channel. The following calibration methods are available:
• AUTOcal = Automatic Calibrator (AutoCal) Module calibration method using Anritsu 36585-Series Precision AutoCal Modules
• ACLIght = Automatic Calibrator (AutoCal) Module calibration method using Anritsu 36581-Series Standard AutoCal Modules.
• LRL = Line-Reflect-Line calibration method
• LRM = Line-Reflect-Match calibration method
• SOLR = Short-Open-Load-Reciprocal calibration method
• SOLT = Short-Open-Load-Through calibration method
• SSLT = Short-Short-Load-Through calibration method
• SSST = Short-Short-Short-Through calibration method
The query outputs the calibration method for the indicated channel.
Cmd Parameters
<char1> AUTOcal | ACLIght | LRL | LRM | SOLR | SOLT | SSLT | SSST
Query Parameters
<char1> AUTO | ACLI | LRL | LRM | SOLR | SOLT | SSLT | SSST
Range
NA
Default Value
SOLT
Syntax Example
:SENS1:CORR:COLL:METH AUTO
:SENS1:CORR:COLL:METH?
AUTO