VectorStar™ MS4640A SeriesMicrowave Vector Network Analyzer : SCPI Commands : :SENSe{1-16}:CORRection:ISOLation Subsystem
 
:SENSe{1-16}:CORRection:ISOLation Subsystem
The :SENSe{1-16}:CORRection:ISOLation subsystem command controls the use of the isolation data during calibration.
Calibration Setup Subsystems
These subsystems are used during various phases of calibration configuration setup:
• :CALCulate{1-16}:IMPedance:TRANsformation Subsystem
• :CALCulate{1-16}:REFerence Subsystem
• :SENSe{1-16}:CORRection:COLLect:METHod Subsystem
• :SENSe{1-16}:CORRection:COLLect:MICrostrip Subsystem
• :SENSe{1-16}:CORRection:COLLect:MULTIple Subsystem
• :SENSe{1-16}:CORRection:COLLect Subsystem
• :SENSe{1-16}:CORRection:COLLect:WAVeguide Subsystem
• :SENSe{1-16}:CORRection:COLLect[:CALa]:PORT Subsystem
• :SENSe{1-16}:CORRection:ISOLation Subsystem
• :SENSe{1-16}:CORRection:STATe Subsystem
 
:SENSe{1-16}:CORRection:ISOLation:STATe <char1>
:SENSe{1-16}:CORRection:ISOLation:STATe?
Description
For the indicated channel, toggles the use of the isolation coefficient data on/off during correction. Outputs the on/off status of the use of the isolation coefficients during correction for the indicated channel.
Cmd Parameters
<char1> 1 | 0 | ON | OFF
Query Parameters
<char1> 1 | 0
Range
NA
Default Value
0
Syntax Example
:SENS1:CORR:ISOL:STAT ON
:SENS1:CORR:ISOL:STAT?