Backhaul Analyzer Measurement Guide : E1 Analyzer (Option 52 or 55)
 
E1 Analyzer (Option 52 or 55)
 
Introduction
Selecting the E1 Analyzer Mode
E1 ‑ 2 Mb/s Fundamentals
FAS and NFAS Words
CRC‑4 Framing
Signaling
Network Equipment
E1 ‑ 2 Mb/s Display
Configuration Menu
Pattern Menu
Error/Alarm
Testing E1 ‑ 2 Mb/s Circuits
In-service Testing
Required Equipment
Measurement Setup Procedure
BERT Measurement Setup Procedure
BERT Table Display Setup
Histogram Display
Histogram Settings
Rx Signal Measurement Procedure
Out‑of‑service Measurements
VF Channel Access Testing
Configuration
Channel Tests
E1 Menus
Configuration Menu
Signal Setup
Payload Setup
Pattern Menu
Error/Alarm Menu
Measurements Menu
BERT Menu
Histogram Menu
VF Menu
Calibrate Menu
Sweep Menu
Measure Menu
Trace Menu
Limit Menu
Other Menus
Introduction
This chapter provides a brief description of an E1 ‑ 2 Mb/s circuit and E1 ‑ 2 Mb/s measurements and also explains how to set up and measure E1 ‑ 2 Mb/s performance using the instrument with Option 52 or Option 55 installed.