VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :CALCulate{1-16}:MARKer Subsystem
 
:CALCulate{1-16}:MARKer Subsystem
The :CALCulate{1-16}:MARKer subsystem commands provide control of the marker table display and marker coupling.
Marker Subsystems
Related marker configuration, control, and reporting commands are described in the following subsystem sections:
• :CALCulate{1-16}:DISPlay:MARKer Subsystem
• :CALCulate{1-16}:MARKer Subsystem
• :CALCulate{1-16}:PARameter{1-16}:MARKer Subsystem
• :CALCulate{1-16}:PARameter{1-16}:MSTatistics Subsystem
• :CALCulate{1-16}[:SELected]:MARKer Subsystem
• :CALCulate{1-16}[:SELected]:MARKer{1-13} Subsystem
• :DISPlay Subsystem
:CALCulate:MARKer:TABle[:STATe] <char>
:CALCulate:MARKer:TABle[:STATe]?
Description
Sets the marker table display on/off.
Returns the marker table display on/off status.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters:
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC:MARK:TAB ON
:CALC:MARK:TAB?
:CALCulate{1-16}:MARKer:COUPle <char>
:CALCulate{1-16}:MARKer:COUPle?
Description
Sets marker coupling on/off on the indicated channel.
Returns the marker coupling on/off state on the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:COUP ON
:CALC1:MARK:COUP?