VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :CALCulate{1-16}[:SELected]:MARKer Subsystem
 
:CALCulate{1-16}[:SELected]:MARKer Subsystem
The :CALCulate{1-16}[SELected]:MARKer subsystem commands control the active marker display, value, and search functions.
Marker Subsystems
Related marker configuration, control, and reporting commands are described multiple subsystems:
• :CALCulate{1-16}:DISPlay:MARKer Subsystem
• :CALCulate{1-16}:MARKer Subsystem
• :CALCulate{1-16}:PARameter{1-16}:MARKer Subsystem
• :CALCulate{1-16}:PARameter{1-16}:MSTatistics Subsystem
• :CALCulate{1-16}[:SELected]:MARKer Subsystem
• :CALCulate{1-16}[:SELected]:MARKer{1-13} Subsystem
• :DISPlay Subsystem
 
:CALCulate{1-16}[:SELected]:MARKer:ACTivate?
Description
Query only.
Returns the active marker number of the active trace on the indicated channel.
To activate a marker, use the command:
:CALCulate{1-16}[:SELected]:MARKer{1-13}:ACTivate
Markers 1 through 12 are standard measurement markers. Marker 13 is the reference marker.
Query Parameters
<NR1> The output parameter is an integer.
Range
1 to 13
Default Value
0
Syntax Example
:CALC1:MARK:ACT?
:CALCulate{1-16}[:SELected]:MARKer:ALL[:STATe] <char>
Description
Sets all markers on/off on the active trace of the indicated channel.
No query.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:ALL ON
:CALCulate{1-16}[:SELected]:MARKer:MOVe:CENTer
Description
Moves the active marker range value to the stimulus center range on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MOV:CENT
:CALCulate{1-16}[:SELected]:MARKer:MOVe:REFMarker
Description
Moves the active marker to the reference marker on the active trace of the indicated channel. The active marker cannot be a reference marker. The reference marker must be on.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MOV:REFM
:CALCulate{1-16}[:SELected]:MARKer:MOVe:STARt
Description
Moves the active marker range value to the stimulus start range on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MOV:STAR
:CALCulate{1-16}[:SELected]:MARKer:MOVe:STOP
Description
Moves the active marker range value to the stimulus stop range on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MOV:STOP
:CALCulate{1-16}[:SELected]:MARKer:MPSEArch
Description
Performs a multiple peak search on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MPSEA
:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:EXCursion <NRf>
:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:EXCursion?
Description
Sets the marker search excursion value for multiple peak searches on the active trace of the indicated channel.
Returns the marker search excursion value for multiple peak searches on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter is in dB.
Query Parameters
<NR3> The output parameter depends on the display type.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:MPSEA:EXC 1.8E1
:CALC1:MARK:MPSEA:EXC?
:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:POLarity <char>
:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:POLarity?
Description
Sets the marker search polarity value for multiple peak searches on the active trace of the indicated channel.
Returns the marker search polarity value for multiple peak searches on the active trace of the indicated channel.
Cmd Parameters
<char> POSitive | NEGative | BOTH
Query Parameters
<char> POS | NEG | BOTH
Range
NA
Default Value
POS
Syntax Example
:CALC1:MARK:MPSEA:POL POS
:CALC1:MARK:MPSEA:POL?
:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:THREshold <NRf>
:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:THREshold?
Description
Sets the marker search threshold value for multiple peak searches on the active trace of the indicated channel.
Returns the marker search threshold value for multiple peak searches on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter is in dB.
Query Parameters
<NR3> The output parameter depends on the display type.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:MPSEA:THRE 1.8E1
:CALC1:MARK:MPSEA:THRE?
:CALCulate{1-16}[:SELected]:MARKer:MTSEArch
Description
Performs a multiple target search on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MTSEA
:CALCulate{1-16}[:SELected]:MARKer:MTSEArch:TOLerance <NRf>
:CALCulate{1-16}[:SELected]:MARKer:MTSEArch:TOLerance?
Description
Sets the marker search target tolerance value for multiple target searches on the active trace of the indicated channel.
Returns the marker search target tolerance value for multiple target searches on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter depends on the display type.
Range
NA
Default Value
0.001
Syntax Example
:CALC1:MARK:MTSEA:TOL 5
:CALC1:MARK:MTSEA:TOL?
:CALCulate{1-16}[:SELected]:MARKer:MTSEArch:TARget <NRf>
:CALCulate{1-16}[:SELected]:MARKer:MTSEArch:TARget?
Description
Sets the marker search target value for multiple target searches on the active trace of the indicated channel.
Returns the marker search target value for multiple target searches on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3>, <NR3>, <NR3> The output parameter depends on the display type.
Range
MPNI
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:MTSEA:TAR 1E7
:CALC1:MARK:MTSEA:TAR?
:CALCulate{1-16}[:SELected]:MARKer:MTSEArch:TRANsition <char>
:CALCulate{1-16}[:SELected]:MARKer:MTSEArch:TRANsition?
Description
Sets the marker search transition polarity for multiple target searches on the active trace of the indicated channel.
Returns the marker search transition polarity for multiple target searches on the active trace of the indicated channel.
Cmd Parameters
<char> POSitive | NEGative | BOTH
Query Parameters
<char> POS | NEG | BOTH
Range
NA
Default Value
BOTH
Syntax Example
:CALC1:MARK:MTSEA:TRAN POS
:CALC1:MARK:MTSEA:TRAN?
:CALCulate{1-16}[:SELected]:MARKer:OFF
Description
Sets all markers of the indicated channel off.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:OFF
:CALCulate{1-16}[:SELected]:MARKer:PSEArch <char>
:CALCulate{1-16}[:SELected]:MARKer:PSEArch?
Description
Performs a peak search on the active trace of the indicated channel.
Returns the last marker search type for peak searches on the active trace of the indicated channel.
Cmd Parameters
<char> PEAK | LEFT | RIGHT
Query Parameters
<char> PEAK | LEFT | RIGHT
Range
NA
Default Value
PEAK
Syntax Example
:CALC1:MARK:PSEA PEAK
:CALC1:MARK:PSEA?
:CALCulate{1-16}[:SELected]:MARKer:PSEArch:EXCursion <NRf>
:CALCulate{1-16}[:SELected]:MARKer:PSEArch:EXCursion?
Description
Sets the marker search excursion value for peak searches on the active trace of the indicated channel.
Returns the marker search excursion value for peak searches on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter is in dB.
Query Parameters
<NR3> The output parameter depends on the display type.
Range
MPNI
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:PSEA:EXC 1.8E1
:CALC1:MARK:PSEA:EXC?
:CALCulate{1-16}[:SELected]:MARKer:PSEArch:POLarity <char>
:CALCulate{1-16}[:SELected]:MARKer:PSEArch:POLarity?
Description
Sets the marker search polarity value for peak searches on the active trace of the indicated channel.
Returns the marker search polarity value for peak searches on the active trace of the indicated channel.
Cmd Parameters
<char> POSitive | NEGative | BOTH
Query Parameters
<char> POS | NEG | BOTH
Range
NA
Default Value
POS
Syntax Example
:CALC1:MARK:PSEA:POL POS
:CALC1:MARK:PSEA:POL?
:CALCulate{1-16}[:SELected]:MARKer:PSEArch:THREshold <NRf>
:CALCulate{1-16}[:SELected]:MARKer:PSEArch:THREshold?
Description
Sets the marker search threshold value for peak searches on the active trace of the indicated channel.
Returns the marker search threshold value for peak searches on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter is in dB.
Query Parameters
<NR3> The output parameter depends on the display type.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:PSEA:THRE 1.8E1
:CALC1:MARK:PSEA:THRE?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:CENTer?
Description
Query only.
Returns the center value resulting from bandwidth search of the active marker on the active trace of the indicated channel.
Cmd Parameters
NA
Query Output
<NR3> The output parameter is in Hertz.
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SEA:BAND:CENT?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:DATA?
Description
Query only.
Returns the marker search bandwidth data of the active marker on the active trace of the indicated channel. If the bandwidth search is not found the values returned will be 0s.
Query Parameters
<NR3>, <NR3>, <NR3>, <NR3>{,<NR3>} The command outputs four or five <NR3> data elements in the following sequence:
• First <NR3> – Bandwidth in Hertz.
• Second <NR3> – Center of marker search range in Hertz, Meters, or Seconds.
• Third <NR3> – Q which is a unitless number.
• Fourth <NR3> – Loss in dB.
• Fifth <NR3> – Optional. The Shape Factor which is a unitless number. This parameter is optional depending on if the Shape Function is turned on or off using the Shape command.
Syntax Example
:CALC1:MARK:SEA:BAND:DATA?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:DEFine <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:DEFine?
Description
Sets the marker search define value for bandwidth calculation of the active marker on the active trace of the indicated channel.
Returns the marker search define value for bandwidth calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:SEA:BAND:DEF 3.0E4
:CALC1:MARK:SEA:BAND:DEF?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:FOUNd?
Description
Query only.
Returns whether bandwidth search of the active marker on the active trace of the indicated channel is successful for the current sweep.
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:BAND:FOUN?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:HIGH?
Description
Query only.
Returns the high value resulting from bandwidth search of the active marker on the active trace of the indicated channel.
Cmd Parameters
NA
Query Output
<NR3> The output parameter is in Hertz.
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SEA:BAND:HIGH?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:LOW?
Description
Query only.
Returns the low value of the active marker resulting from bandwidth search on the active trace of the indicated channel.
Cmd Parameters
NA
Query Output
<NR3> The output parameter is in Hertz.
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SEA:BAND:LOW?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:RTYPe <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:RTYPe?
Description
Sets the reference type for bandwidth search on the active trace of the indicated channel.
Returns the reference type for bandwidth search on the active trace of the indicated channel.
Cmd Parameters
<char> MARKer | RVALue
• MARKer = Marker
• RVALue = Reference Value
Query Output
<char> MARK | RVAL
Range
NA
Default Value
MARK
Syntax Example
:CALC1:MARK:SEA:BAND:RTYPE RVAL
:CALC1:MARK:SEA:BAND:RTYPE?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:RVALue <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:RVALue?
Description
Sets the reference value for bandwidth search on the active trace of the indicated channel.
Returns the reference value for bandwidth search on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Output
<NR3> The output parameter is a unitless number.
Range
MPNF
Default Value
0
Syntax Example
:CALC1:MARK:SEA:BAND:RVAL 5
:CALC1:MARK:SEA:BAND:RVAL?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe:HIGH <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe:HIGH?
Description
Sets the marker search high value for bandwidth shape factor calculation of the active marker on the active trace of the indicated channel.
Returns the marker search high value for bandwidth shape factor calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter is a unitless number.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:SEA:BAND:SHAP:HIGH 4E0
:CALC1:MARK:SEA:BAND:SHAP:HIGH?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe:LOW <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe:LOW?
Description
Sets the marker search low value for bandwidth shape factor calculation of the active marker on the active trace of the indicated channel.
Returns the marker search low value for bandwidth shape factor calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter is a unitless number.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:SEA:BAND:SHAP:LOW 4E0
:CALC1:MARK:SEA:BAND:SHAP:LOW?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe[:STATe] <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe[:STATe]?
Description
Sets the marker search bandwidth shape factor calculation on/off state of the active marker on the active trace of the indicated channel.
Returns the on/off status of marker search bandwidth shape factor of the active marker calculation on the active trace of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:BAND:SHAP 1
:CALC1:MARK:SEA:BAND:SHAP?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SSTart <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SSTart?
Description
Sets the bandwidth search start position on the active trace of the indicated channel. This is only used when the bandwidth Reference Type is set to Reference Value. See :CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:RTYPe <char>
Returns the bandwidth search start position on the active trace of the indicated channel.
Cmd Parameters
<char> BEGinning | MAXimum
• BEGinning = Beginning
• MAXimum = Reference
Query Output
BEG | MAX
Range
NA
Default Value
MAX
Syntax Example
:CALC1:MARK:SEA:BAND:SSTart MAX
:CALC1:MARK:SEA:BAND:SSTart?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth[:STATe] <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth[:STATe]?
Description
Sets the marker search bandwidth calculation on/off state of the active marker on the active trace of the indicated channel.
Returns the on/off status of marker search bandwidth calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:BAND ON
:CALC1:MARK:SEA:BAND?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:DISTance:RANGe{1-20}:STARt:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:DISTance:RANGe{1-20}:STARt:X?
Description
Sets the marker search range start position for the indicated channel and range for distance axis.
Returns the marker search range start position for the indicated channel and range for distance axis.
Cmd Parameters
<NRf> The input parameter is in Meters.
Query Parameters
NA
Query Output
<NR3> The output is in Meters.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:DIST:RANG1:STAR:X 2.5E9
:CALC1:MARK:SEA:DIST:RANG1:STAR:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:DISTance:RANGe{1-20}:STOP:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:DISTance:RANGe{1-20}:STOP:X?
Description
Sets the marker search range stop position for the indicated channel and range for distance axis.
Returns the marker search range stop position for the indicated channel and range for distance axis.
Cmd Parameters
<NRf> The input parameter is in Meters.
Query Parameters
NA
Query Output
<NR3> The output is in Meters.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:DIST:RANG1:STOP:X 1E-3
:CALC1:MARK:SEA:DIST:RANG1:STOP:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:FREQuency:RANGe{1-20}:STARt:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:FREQuency:RANGe{1-20}:STARt:X?
Description
Sets the marker search range start position for the indicated channel and range for frequency axis.
Returns the marker search range start position for the indicated channel and range for frequency axis.
Cmd Parameters
<NRf> The input parameter is in Hertz.
Query Parameters
NA
Query Output
<NR3> The output is in Hertz.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:FREQ:RANG1:STAR:X 2.5E9
:CALC1:MARK:SEA:FREQ:RANG1:STAR:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:FREQuency:RANGe{1-20}:STOP:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:FREQuency:RANGe{1-20}:STOP:X?
Description
Sets the marker search range stop position for the indicated channel and range for frequency axis.
Returns the marker search range stop position for the indicated channel and range for frequency axis.
Cmd Parameters
<NRf> The input parameter is in Hertz.
Query Parameters
NA
Query Output
<NR3> The output is in Hertz.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:FREQ:RANG1:STOP:X 2.5E9
:CALC1:MARK:SEA:FREQ:RANG1:STOP:X?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:CENTer?
Description
Query only.
Returns the center value resulting from notch search of the active marker on the active trace of the indicated channel.
Cmd Parameters
NA
Query Output
<NR3> The output parameter is in Hertz.
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SEA:NOTC:CENT?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:DATA?
Description
Query only.
Returns the marker search notch bandwidth data of the active marker on the active trace of the indicated channel. If the notch search is not found the values returned will be 0s.
Query Parameters
<NR3>, <NR3>, <NR3>, <NR3>{, <NR3>} The output parameter is in Hertz, Meters, or Seconds.
Range
Outputs multiple NR3 data
Default Value
NA
Syntax Example
:CALC1:MARK:SEA:NOTC:DATA?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:DEFine <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:DEFine?
Description
Sets the marker search define value for notch bandwidth calculation of the active marker on the active trace of the indicated channel.
Returns the marker search define value for notch bandwidth calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:SEA:NOTC:DEF 1.0E4
:CALC1:MARK:SEA:NOTC:DEF?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:FOUNd?
Description
Query only.
Returns whether notch search of the active marker on the active trace of the indicated channel is successful for the current sweep.
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:NOTC:FOUN?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:HIGH?
Description
Query only.
Returns the high value resulting from notch search of the active marker on the active trace of the indicated channel.
Cmd Parameters
NA
Query Output
<NR3> The output parameter is in Hertz.
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SEA:NOTC:HIGH?
 
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:LOW?
Description
Query only.
Returns the low value resulting from notch search of the active marker on the active trace of the indicated channel.
Cmd Parameters
NA
Query Output
<NR3> The output parameter is in Hertz.
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SEA:NOTC:LOW?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:RTYPe <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:RTYPe?
Description
Sets the reference type for notch search on the active trace of the indicated channel.
Returns the reference type for notch search on the active trace of the indicated channel.
Cmd Parameters
<char> MARKer|RVALue
• MARKer = Marker
• RVALue = Reference Value
Query Output
MARK | RVAL
Range
NA
Default Value
MARK
Syntax Example
:CALC1:MARK:SEA:NOTC:RTYPE RVAL
:CALC1:MARK:SEA:NOTC:RTYPE?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:RVALue <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:RVALue?
Description
Sets the reference value for notch search on the active trace of the indicated channel.
Returns the reference value for notch search on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Output
<NR3> The output parameter is a unitless number.
Range
MPNF
Default Value
0
Syntax Example
:CALC1:MARK:SEA:NOTC:RVAL 5
:CALC1:MARK:SEA:NOTC:RVAL?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe:HIGH <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe:HIGH?
Description
Sets the marker search high value for notch shape factor calculation of the active marker on the active trace of the indicated channel.
Returns the marker search high value for notch shape factor calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:SEA:NOTC:SHAP:HIGH 4E0
:CALC1:MARK:SEA:NOTC:SHAP:HIGH?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe:LOW <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe:LOW?
Description
Sets the marker search low value for notch shape factor calculation of the active marker on the active trace of the indicated channel.
Returns the marker search low value for notch shape factor calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter is a unitless number.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:SEA:NOTC:SHAP:LOW 4E0
:CALC1:MARK:SEA:NOTC:SHAP:LOW?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe[:STATe] <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe[:STATe]?
Description
Sets the marker search notch shape factor calculation on/off state of the active marker on the active trace of the indicated channel.
Returns the on/off status of the marker search notch shape factor calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:NOTC:SHAP ON
:CALC1:MARK:SEA:NOTC:SHAP?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SSTart <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SSTart?
Description
This is only used when the notch Reference Type is set to Reference Value.
See :CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:RTYPe <char>
Sets the notch search start position on the active trace of the indicated channel.
Returns the notch search start position on the active trace of the indicated channel.
Cmd Parameters
<char> BEGinning | MINimum
• BEGinning = Beginning
• MINimum = Reference
Query Output
BEG | MIN
Range
NA
Default Value
MIN
Syntax Example
:CALC1:MARK:SEA:NOTC:SST MIN
:CALC1:MARK:SEA:NOTC:SST?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh[:STATe] <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh[:STATe]?
Description
Sets the marker search notch calculation on/off state of the active marker on the active trace of the indicated channel.
Returns the on/off status of marker search notch calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:NOTC ON
:CALC1:MARK:SEA:NOTC?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:POINt:RANGe{1-20}:STARt:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:POINt:RANGe{1-20}:STARt:X?
Description
Sets the marker search range start position for the indicated channel and range for point- or indexed-based axis (i.e. CW mode).
Returns the marker search range start position for the indicated channel and range for point- or indexed-based axis (i.e. CW mode).
Cmd Parameters
<NRf> The input parameter is unitless.
Query Parameters
NA
Query Output
<NR3> The output is unitless.
Range
0 to 25000/100000 based on maximum points available.
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:POIN:RANG1:STAR:X 5.0
:CALC1:MARK:SEA:POIN:RANG1:STAR:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:POINt:RANGe{1-20}:STOP:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:POINt:RANGe{1-20}:STOP:X?
Description
Sets the marker search range stop position for the indicated channel and range for point- or indexed-based axis (i.e. CW mode).
Returns the marker search range stop position for the indicated channel and range for point- or indexed-based axis (i.e. CW mode).
Cmd Parameters
<NRf> The input parameter is unitless.
Query Parameters
NA
Query Output
<NR3> The output is unitless.
Range
0 to 25000/100000 based on maximum points available.
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:POIN:RANG1:STOP:X 100
:CALC1:MARK:SEA:POIN:RANG1:STOP:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:POWer:RANGe{1-20}:STARt:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:POWer:RANGe{1-20}:STARt:X?
Description
Sets the marker search range start position for the indicated channel and range for power axis.
Returns the marker search range start position for the indicated channel and range for power axis.
Cmd Parameters
<NRf> The input parameter is in dBm.
Query Parameters
NA
Query Output
<NR3> The output is in dBm.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:POW:RANG1:STAR:X 3.0E0
:CALC1:MARK:SEA:POW:RANG1:STAR:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:POWer:RANGe{1-20}:STOP:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:POWer:RANGe{1-20}:STOP:X?
Description
Sets the marker search range stop position for the indicated channel and range for power axis.
Returns the marker search range stop position for the indicated channel and range for power axis.
Cmd Parameters
<NRf> The input parameter is in dBm.
Query Parameters
NA
Query Output
<NR3> The output is in dBm.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:POW:RANG1:STOP:X -10.0e0
:CALC1:MARK:SEA:POW:RANG1:STOP:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe{1-20}:STARt:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe{1-20}:STARt:X?
Description
Sets the marker search range start position for the indicated channel and range. The x-axis domain will be based on the domain of the active trace.
Returns the marker search range start position for the indicated channel and range. The x-axis domain will be based on the domain of the active trace.
Cmd Parameters
<NRf> The input parameter is in Hertz, Meters, Seconds, dBm, or unit-less, based on the domain of the active trace.
Query Parameters
NA
Query Output
<NR3> The output is in Hertz, Meters, Seconds, dBm, or unit-less, based on the domain of the active trace.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:RANG1:STAR:X 2.5E9
:CALC1:MARK:SEA:RANG1:STAR:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe{1-20}:STOP:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe{1-20}:STOP:X?
Description
Sets the marker search range stop position for the indicated channel and range. The x-axis domain will be based on the domain of the active trace.
Returns the marker search range stop position for the indicated channel and range. The x-axis domain will be based on the domain of the active trace.
Cmd Parameters
<NRf> The input parameter is in Hertz, Meters, Seconds, dBm, or unit-less, based on the domain of the active trace.
Query Parameters
NA
Query Output
<NR3> The output is in Hertz, Meters, Seconds, dBm, or unit-less, based on the domain of the active trace.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:RANG1:STOP:X 2.5E9
:CALC1:MARK:SEA:RANG1:STOP:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch?
Description
Sets the marker search type for the active marker on the active trace of the indicated channel.
Returns the marker search type for the active marker on the active trace of the indicated channel.
Cmd Parameters
<char> MAX | MIN | PEAK | TARGet
Query Parameters
<char> MAX | MIN | PEAK | TARG
Range
NA
Default Value
MAX
Syntax Example
:CALC1:MARK:SEA MAX
:CALC1:MARK:SEA?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:ALL[:STATe] <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:ALL[:STATe]?
Description
Sets applying the marker search range on/off state to all traces of the indicated channel.
Returns the on/off status of applying the marker search range to all traces of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:RANG:ALL ON
:CALC1:MARK:SEA:RANG:ALL?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:STARt:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:STARt:X?
Description
Sets the marker search range start range value on the active trace of the indicated channel.
Returns the marker search range start range value on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Hertz, Meters, or Seconds.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:RANG:STAR:X 2.5E9
:CALC1:MARK:SEA:RANG:STAR:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:STOP:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:STOP:X?
Description
Sets the marker search range stop range value on the active trace of the indicated channel.
Returns the marker search range stop range value on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Hertz, Meters, or Seconds.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
]Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:RANG:STOP:X 2.5E9
:CALC1:MARK:SEA:RANG:STOP:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe[:STATe] <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe[:STATe]?
Description
Sets the marker trace search range on/off state on the active trace of the indicated channel.
Returns the on/off status of marker trace search range on the active trace of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:RANG ON
:CALC1:MARK:SEA:RANG?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:TIME:RANGe{1-20}:STARt:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:TIME:RANGe{1-20}:STARt:X?
Description
Sets the marker search range start position for the indicated channel and range for time axis.
Returns the marker search range start position for the indicated channel and range for time axis.
Cmd Parameters
<NRf> The input parameter is in Seconds.
Query Parameters
NA
Query Output
<NR3> The output is in Seconds.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:TIME:RANG1:STAR:X 2.5E9
:CALC1:MARK:SEA:TIME:RANG1:STAR:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:TIME:RANGe{1-20}:STOP:X <NRf>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:TIME:RANGe{1-20}:STOP:X?
Description
Sets the marker search range stop position for the indicated channel and range for time axis.
Returns the marker search range stop position for the indicated channel and range for time axis.
Cmd Parameters
<NRf> The input parameter is in Seconds.
Query Parameters
NA
Query Output
<NR3> The output is in Seconds.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:TIME:RANG1:STOP:X 2.5E9
:CALC1:MARK:SEA:TIME:RANG1:STOP:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:TRACKing[:STATe] <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:TRACKing[:STATe]?
Description
Sets the marker search tracking on/off state on the active trace of the indicated channel.
Returns the on/off status of marker search tracking on the active trace of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:TRACK ON
:CALC1:MARK:SEA:TRACK?
:CALCulate{1-16}[:SELected]:MARKer:SEArch:TRACKing:CENTer[:STATe] <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch:TRACKing:CENTer[:STATe]?
Description
Sets the marker search track-and-center on/off state on the active trace of the indicated channel.
Returns the on/off status of marker search track-and-center on the active trace of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:TRACK:CENT ON
:CALC1:MARK:SEA:TRACK:CENT?
:CALCulate{1-16}[:SELected]:MARKer:SET:CENTer
Description
Sets the stimulus center range to the active marker range value on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SET:CENT
:CALCulate{1-16}[:SELected]:MARKer:SET:REFLevel
Description
Sets the display reference level to the active marker response value on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SET:REFL
:CALCulate{1-16}[:SELected]:MARKer:SET:STARt
Description
Sets the stimulus start range to the active marker range value on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SET:STAR
:CALCulate{1-16}[:SELected]:MARKer:SET:STOP
Description
Sets the stimulus stop range to the active marker range value on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SET:STOP
:CALCulate{1-16}[:SELected]:MARKer:TSEArch:TYPE <char>
:CALCulate{1-16}[:SELected]:MARKer:TSEArch:TYPE?
Description
Sets the target marker search type for the active trace and active marker of the indicated channel.
Returns the target marker search type for the active trace and active marker of the indicated channel.
Cmd Parameters
<char> ABSolute | RELative
Query Parameters
NA
Query Output
<char> ABS | REL
Range
NA
Default Value
ABS
Syntax Example
:CALC1:MARK:TSEA:TYPE REL
:CALC1:MARK:TSEA:TYPE?
:CALCulate{1-16}[:SELected]:MARKer:TSEArch <char>
:CALCulate{1-16}[:SELected]:MARKer:TSEArch?
Description
Sets the marker search type (Target, Left, Right) for the active trace and active marker on the indicated channel.
Returns the last target marker search type (Target, Left, Right) for the active trace and active marker on the indicated channel.
Cmd Parameters
<char> TARGet | LEFT | RIGHT
Query Parameters
<char> TARG | LEFT | RIGHT
Range
NA
Default Value
TARG
Syntax Example
:CALC1:MARK:TSEA TARG
:CALC1:MARK:TSEA?
:CALCulate{1-16}[:SELected]:MARKer:TSEArch:RELative <NRf>
:CALCulate{1-16}[:SELected]:MARKer:TSEArch:RELative?
Description
Sets the marker search relative target value for target searches on the active trace and active marker on the indicated channel.
Returns the marker search relative target value for target searches the active trace and active marker on the indicated channel.
See Table: Trace Parameters and Coefficients for a complete listing of trace graph types, default settings, and available ranges.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
NA
Query Output
<NR3> The output parameter depends on the display type.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:TSEA:REL 1E7
:CALC1:MARK:TSEA:REL?
:CALCulate{1-16}[:SELected]:MARKer:TSEArch:RELative:TYPE <char>
:CALCulate{1-16}[:SELected]:MARKer:TSEArch:RELative:TYPE?
Description
Sets the marker search relative to type for target searches on the active trace and active marker on the indicated channel.
Returns the marker search relative to type for target searches the active trace and active marker on the indicated channel.
Cmd Parameters
<char> MAXimum | MINimum | REFMarker
Query Parameters
NA
Query Output
<char> MAX | MIN | REFM
Range
NA
Default Value
MAX
Syntax Example
:CALC1:MARK:TSEA:REL:TYPE MAX
:CALC1:MARK:TSEA:REL:TYPE?
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer:TSEArch:TARget <NRf>
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer:TSEArch:TARget?
Description
Sets the marker search target value for target searches on the active marker on the indicated channel and trace.
Returns the marker search target value for target searches on the active marker on the indicated channel and trace.
See Table: Trace Parameters and Coefficients for a complete listing of trace graph types, default settings, and available ranges.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter depends on the display type.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:TRAC1:MARK:TSEA:TAR 1E7
:CALC1:TRAC1:MARK:TSEA:TAR?
:CALCulate{1-16}[:SELected]:MARKer:TSEArch:TOLerance <NRf>
:CALCulate{1-16}[:SELected]:MARKer:TSEArch:TOLerance?
Description
Sets the marker search target tolerance value for target searches on the active trace and active marker on the indicated channel.
Returns the marker search target tolerance value for target searches the active trace and active marker on the indicated channel.
See Table: Trace Parameters and Coefficients for a complete listing of trace graph types, default settings, and available ranges.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
NA
Query Output
<NR3> The output parameter depends on the display type.
Range
0 to MPNF (positive number)
Default Value
0.000000E+000
Syntax Example
:CALC1:MARK:TSEA:TOL 1E7
:CALC1:MARK:TSEA:TOL?
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer:TSEArch:TRANsition <char>
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer:TSEArch:TRANsition?
Description
Sets the marker search transition polarity for target searches on the active marker on the indicated channel and trace.
Returns the marker search transition polarity for target searches on the active marker on the indicated channel and trace.
Cmd Parameters
<char> POSitive | NEGative | BOTH
Query Parameters
<char> POS | NEG | BOTH
Range
NA
Default Value
BOTH
Syntax Example
:CALC1:TRAC1:MARK:TSEA:TRAN POS
:CALC1:TRAC1:MARK:TSEA:TRAN?