Broadband/mmWave

VectorStar™ MS464xB Series Microwave Vector Network Analyzer User Interface Reference : Broadband/mmWave

Broadband/mmWave

Chapter Overview

This chapter provides information for the single APPLICATION menu which sets the instrument measurement mode, and whether broadband or multiple sources are used. The menu also provides access to NXN setup.

Other Application Menu Chapters

The other chapters in this manual on APPLICATION menus with specific application feature focus are:

• Application Menus – Overview

• Multiple Source

• Noise Figure (Option 41)

• Chapter 16, “Differential Noise Figure (Option 48)”

• Mixer Setup

• NxN

• PulseView™

• DifferentialView™ (True Mode Stimulus)

• Advanced Fast CW

• Spectrum Analysis

Application Menus and Dialog Boxes for BB/mmWave

The APPLICATION menu set contains the following menus and dialogs:

• Application Menus for BB/mmWave

• Broadband/mmWave Setup

• 3738 SETUP Menu

• 3739 SETUP Menu

• NLTL MODULE Menu

• mmWAVE WG Menu

• mmWAVE ALC CAL Menu

• mmWAVE ALC CAL (MM MODULE NAME) Dialog Box

• MODIFY EXTERNAL SOURCE EQUATIONS Dialog Box

• EXTERNAL MODULE SELECTION Dialog Box

• Broadband/mmWave Control

• EXTERNAL MODULE CTRL Dialog Box Overview

• EXTERNAL MODULE CTRL Dialog Box – Module Type = OFF

• EXTERNAL MODULE CTRL Dialog Box – Module Type = mmWave (3738)

• EXTERNAL MODULE CTRL Dialog Box – Module Type = mmWave (3739)

• EXTERNAL MODULE CTRL Dialog Box – Module Type = BB/mmWave (3739)

• EXTERNAL MODULE CTRL Dialog Box – Options 086, 087, 088, or 089

• EXTERNAL MODULE CTRL Dialog Box – with Low Power Leveling and RF/VNA Leveling