LEVEL Menu

RF Power Level parameters can be set and applied to CW frequencies and Swept Frequencies. The LEVEL menu is shown in Figure: Level Menu.

Level Menu

LEVEL Press to edit the power level. Range is -130 dBm to 33 dBm with Option 2. Range is –20 to 33 dBm without Option 2. FREQUENCY Press to edit the CW frequency. Range is same as described in Figure: Step Sweep SETUP Menu. COPY TO LIST Copies the set frequency and level parameters to the LIST menu. See LIST Menu. ENABLE CW MODE Press to stop a sweep. When pressed, CW mode is enabled. PRESETS Press to edit a LEVEL in the Presets list. Press the pencil icon to edit an F0 - F9 preset level. See the LEVEL PRESETS Menu. RF Output Toggle to turn RF on or Off.

To select a CW power level for output, edit the current power level, enter a new power level, or select one of the preset level parameters from the PRESET menu. Set MG362x1A in the CW level mode from the main menu:

Press the LEVEL field in the display. The annotated LEVEL entry field is displayed and the LCD display is grayed as shown in Figure: Frequency Entry. Enter and new CW power level or edit the current power level using the cursor control keys, the rotary data knob, or the front panel keypad and the appropriate terminator button. If a parameter was selected in error and no editing is required, click outside the active window or click a terminator to close. to edit.

Once a CW power level has been entered into the field, press a terminator button and then press outside the annotated entry field to show the power level in the LCD display as shown in Figure: Frequency Entered.


	Anritsu Company 1-800-ANRITSU 10450-00072, Rev. B