Contains all frequency control settings such as center frequency, start and stop frequency, span, frequency offset, and frequency step. Refer to Setting Frequency Parameters.

Provides access to all amplitude-related settings including reference level, graticule scale, and attenuator/preamp settings. Refer to Setting Amplitude Parameters.

Provides access to resolution and video bandwidth settings and Auto ratios, and sets the bandwidth filter types. Refer to Setting Amplitude Parameters.

Provides trace/cursor and detection-related controls to set trace/cursor behaviors, presets, and access to the trace/detector settings table. Refer to Setting Trace Parameters.

Provides controls for sweep behaviors, number of measurement points, and gated sweep settings (Option 90). Refer to Setting Sweep Parameters.

Used to enable and set all marker-related parameters and provides access to the marker table. Refer to Setting Up Markers.

Provides controls for setting up limit lines and limit alarms. Refer to Setting Up Limit Lines.

Controls the trigger source, delay and holdoff, and trigger slope settings. Refer to Setting Up Triggering.

Used to select measurements such as spectrum, channel power, occupied bandwidth, adjacent channel power, spectral emissions mask, and opens the spectrogram. Refer to Setting Up Advanced Measurements.

Measurement controls for setting up advanced measurements. Refer to Setting Up Advanced Measurements).

Opens the PRESET menu with selective trace, marker, limits, and measurement preset commands, or an all inclusive analyzer preset command. Refer to SETUP Menu.

Used to save and recall instrument setups and measurements, limit lines, and screen images. Also provides access to save on event controls. Refer to FILE Menu.