VectorStar™ MS4640A SeriesMicrowave Vector Network Analyzer : SCPI Commands : :CALCulate{1-16}[:SELected]:CONVersion Subsystem
 
:CALCulate{1-16}[:SELected]:CONVersion Subsystem
The :CALCulate{1-16}[:SELected]:CONVersion subsystem sets the parameter conversion configuration and control for the indicated channel and the active trace.
Trace Subsystems
Related trace subsystems are:
• :CALCulate{1-16}:PARameter and :PARameter{1-16} Subsystem
• :CALCulate{1-16}:PARameter{1-16}:FSIMulator Subsystem
• :CALCulate{1-16}:PARameter{1-16}:SELect Subsystem
• :CALCulate{1-16}:POLar Subsystem
• :CALCulate{1-16}:PROCessing:ORDer Subsystem
• :CALCulate{1-16}[:SELected]:CONVersion Subsystem
• :CALCulate{1-16}[:SELected]:DATA Subsystem
• :CALCulate{1-16}[:SELected]:FORmat Subsystem
• :CALCulate{1-16}[:SELected]:MATH Subsystem
• :CALCulate{1-16}[:SELected]:MDATA Subsystem
• :CALCulate{1-16}[:SELected]:SMITh Subsystem
• :CALCulate{1-16}[:SELected]:SMOothing Subsystem
• :CALCulate{1-16}[:SELected]:TDATA Subsystem
• :DISPlay Subsystem
 
:CALCulate{1-16}[:SELected]:CONVersion:FUNCtion <char1>
:CALCulate{1-16}[:SELected]:CONVersion:FUNCtion?
Description
The command sets the parameter conversion function on the active trace of the indicated channel. The query outputs the parameter conversion function on the active trace of the indicated channel.
Cmd Parameters
<char1> ZREFlection | ZTRansmit | YREFlection | YTRansmit | INVersion
Where:
• ZREFlection = Sets the conversion parameter to Z:Reflection.
• ZTRansmit = Sets the conversion parameter to Z:Transmission.
• YREFlection = Sets the conversion parameter to Y:Reflection.
• YTRansmit = Sets the conversion parameter to Y:Transmission.
• INVersion = Inverts the parameter to 1/S.
Query Parameters
<char1> ZREF | ZTR | YREF | YTR | INV
Range
NA
Default Value
INV
Syntax Example
:CALC1:CONV:FUNC ZREF
:CALC1:CONV:FUNC?
 
:CALCulate{1-16}[:SELected]:CONVersion[:STATe] <char1>
:CALCulate{1-16}[:SELected]:CONVersion[:STATe]?
Description
The command sets the on/off status of parameter conversion on the active trace of the indicated channel. The query outputs the on/off status of parameter conversion on the active trace of the indicated channel.
Cmd Parameters
<char1> 1 | 0 | ON | OFF
Query Parameters
<char1> 1 | 0
Default Value
0
Syntax Example
:CALC1:CONV ON
:CALC1:CONV?