Spectrum Analyzerfor Anritsu RF and Microwave Handheld Instruments : Interference Analyzer (Option 25)
  
Interference Analyzer (Option 25)
 
Introduction
General Measurement Setups
Spectrum
Spectrogram
Signal Strength
Received Signal Strength Indicator (RSSI)
Signal ID
Interference Mapping
Overview
Interference Mapping (Antenna Only)
Interference Mapping (MA2700 and Antenna)
Save the Mapping Information
Interference Analyzer (IA) Menu Maps
Measurements Menu (1 of 4)
Measurements Menu (2 of 4)
Measurements Menu (3 of 4)
Measurements Menu (4 of 4)
Marker Menus
Sweep Menus
Trace Menus
Limit Menus
Application Options Menu
Freq (Frequency) Menu
Freq (Frequency) Menu (Continued)
Frequency Menu with Offset Function
Freq 2/2 Menu
Span Menu
Amplitude Menu
[Amplitude] Units Menus
Detection Menu
BW (Bandwidth) Menu
Measurements Menu
[Spectrum] Measure Menu
Power and BW Menu
Field Strength Menu
OCC BW Menu
Channel Power Menu
ACPR Menu
Masks and C/I Menu
Emission Mask Menu
C/I Menu
C/I Signal Type Menu
AM/FM Demod 1/2 Menu
Demod Type Menu
AM/FM Demod 2/2 (More) Menu
Generator Menu
IQ Waveform Capture Menu (Option 24)
IQ Capture Triggering Menu
IQ Capture Save Menu
IQ Capture Frequency/Amplitude Menu
Coverage Mapping Menu (Option 431)
Spectrogram Menu
Signal Strength Menu
RSSI Menu
Signal ID Menu
Interference Mapping Menu
Bearing Lines Menu
Mapping Save/Recall Menu
Direction Finding Menu
Pan & Zoom Menu
DF Sound Settings Menu
Marker Menu
Marker and Peak Options Menu
Marker 2/2 Menu
Sweep Menu
Sweep Mode Menu
Triggering Menu
Triggering Source Menu
Gated Sweep Menu (Option 90)
Trace Menu
Trace A Ops Menu
Trace B Ops Menu
Trace C Ops Menu
Limit Menu
[Limit] Edit Menu
[Limit] Edit Menu (Continued)
Limit Move Menu
Limit Envelope Menu
Limit Advanced Menu
Application Options
Other Menus
Introduction
Many wireless networks operate in complicated signal environments. Three or four base station antennas may be located on the same tower, and can create interference problems, which can affect system capacity and coverage.
The Interference Analyzer (option 25) adds five measurement capabilities to the spectrum analyzer:
Spectrogram
Signal Strength
Received Signal Strength Indicator (RSSI)
Signal ID
Interference Mapping
The instrument also has a spectrum mode which displays signals in a traditional spectrum
analyzer view.
Note 
Set the instrument to Interference Analyzer mode for all the measurements in this chapter.