WCDMA Analyzer Measurement Guide : WCDMA Analyzer (Option 871) : WCDMA Measurement Setup
 
WCDMA Measurement Setup
WCDMA base station validation qualifies the performance of the base stations with essential measurements that are in full compliance with 3GPP. The WCDMA analyzer features smart measurements that make configuring these measurements and views for WCDMA compliance testing easy:
• WCDMA demod summary measurements:
• Primary Scrambling Code
• Code Group
• Frequency Error
• Time Offset
• Sync Status
• Count
• Average
• Standard Deviation
• Minimum
• Maximum
• Carrier Frequency
• Channel Power
• Occupied Bandwidth
• Scrambling Code
• Channel Power (CP)
• Adjacent Channel Power (ACP)
• Spectral Emission Mask (SEM)
• Occupied Bandwidth (OBW)
MEASURE Menu (WCDMA)
 
WCDMA MEASURE Menu
-
 
MEASUREMENT
Selects the desired measurement type from the following list:
• WCDMA: Displays the current beam measurement status in a quick-view summary that includes the PCI and received power measurement summaries. See WCDMA Demod Summary.
• Channel Power: Provides an RF channel power measurement that includes the total channel power, power spectral density (PSD), and pass/fail compliance testing. See WCDMA Channel Power.
• ACP: The ACP table and channel lines are added to the measurement display. Refer to WCDMA Adjacent Channel Power.
• SEM: The spectrum emissions mask table and a spectrum mask is added to the measurement display. Refer to WCDMA Spectrum Emission Mask.
• OBW: The occupied bandwidth table and channel lines are added to the measurement display. Refer to WCDMA Occupied Bandwidth.
VIEW
WCDMA measurement supports the following two views:
SETUP
Opens one of the measurement SETUP menus. The WCDMA SETUP menus can be access directly via the SETUP or MEASURE menus after the desired measurement has been selected. The setup menu depends on the current measurement and view selected.