WCDMA Analyzer Measurement Guide
:
WCDMA Analyzer (Option 871)
WCDMA Analyzer (Option 871)
Introduction
RF Measurements
Modulation Measurements
Selecting the Analyzer
Main Menu
Using Menus
Setting Frequency and Bandwidth Parameters
Configuring the Band
FREQ SPAN Menu
GESTURES Menu
Setting Amplitude
Setting Amplitude Parameters
Reference Level Offset for External Loss or External Gain
Attenuator Functions
Indications of Excessive Signal Level
Overpower Warning
AMPLITUDE Menu
Setting Bandwidth Parameters
BANDWIDTH Menu
Setting Trace Parameters
Traces in WCDMA
Trace Math
Trace Normalization
TRACE Menu
Trace Detector Types
Setting Sweep Parameters
SWEEP Menu – WCDMA Demod Summary Measurements
SWEEP Menu – WCDMA RF Measurements
Gated Sweep (Option 90)
GATED SWEEP Menu
GATED SWEEP ON Display
POWER VS. TIME Display
Setting Up Markers
Placing a Normal Marker
Placing a Fixed Marker
Placing a Delta Marker
MARKER Menu
MARKER PEAK SEARCH Menu
Marker Functions
Marker Table
WCDMA Measurement Setup
MEASURE Menu (WCDMA)
WCDMA Demod Summary
WCDMA Demod Summary View
WCDMA Summary Table View
STATUS PANEL (WCDMA Demod Summary)
WCDMA Channel Power
SETUP Menu (Channel Power)
STATUS PANEL (Channel Power)
WCDMA Occupied Bandwidth
SETUP Menu (Occupied BW)
STATUS PANEL (Occupied BW)
WCDMA Adjacent Channel Power
SETUP Menu (ACP)
STATUS PANEL (ACP)
WCDMA Spectrum Emission Mask
Spectrum Emission Mask Measurement Basic Setup
SETUP Menu (SEM)
Example Custom Signal Emission Mask
STATUS PANEL (SEM)
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu