VNA Master™ User Guide MS20xxB
General Information
Introduction
Contacting Anritsu for Sales and Service
Product Information, Compliance, and Safety
Additional Documents
VNA Master Specifications
Available Models and Accessories
Identifying the Connections
General Description
Soft Carrying Case
Tilt Bail Stand
Preventive Maintenance
Calibration Requirements — Vector Network Analyzer
Annual Verification
ESD Caution
RF Input Warning (MS203xB only)
Battery Replacement
Secure Environment Workplace
VNA Master Memory Types
Erase All User Files in Internal Memory
Recommended Usage in a Secure Environment
Instrument Overview
Introduction
Turning On the VNA Master
Front Panel Overview
Front Panel Buttons
Touch Screen Keys
Keypad Menu Buttons (1 to 9)
Touch Points
Touch Screen Calibration
LED Indicators
Display Overview
Display Settings
Test Panel Connector Overview
MS2024B and MS2025B
MS2034B and MS2035B
External Power
USB Interface – Type A
USB Interface – Mini‑B
LAN Connection (Option 411)
Headset Jack
Connector Care
Connecting Procedure
Disconnecting Procedure
VNA Master Connectors
External Trigger In (50 ohm)
External Reference In (50 ohm)
Spectrum Analyzer RF In (50 ohm)
GPS Antenna Connector (Option 31)
VNA Port‑1 (50 ohm)
VNA Port‑2 (50 ohm)
Symbols and Indicators
Indicators
Symbols and Icons
Symbols and Icons on the Title Bar
Additional Messages Displayed
Data Entry
Numeric Values
Parameter Setting
Text Entry
Mode Selector Menu
Quick Start Guide
Introduction
Measurement Mode Selection
Vector Network Analyzer
Selecting the Measurement Type
Setting the Frequency
Setting the Scale
Turning On Markers
Peak and Valley Search Markers
Find Marker Value
Setting Up Delta Markers
Setting a Single Limit Line
Setting Up Distance Domain
Calibration Considerations
Cal Type
Spectrum Analyzer
Set Start and Stop Frequencies
Enter the Center Frequency
Select a Signal Standard
Set the Measurement Bandwidth
Set the Amplitude
Power Offset Set Up for Compensating External Loss
Set the Span
Single Limit Line
Create a Limit Envelope
Setting Up Markers
Select a Smart Measurement Type
Saving Measurements
External Power On
File Management
Introduction
File Types
Managing Files
Save Files
Save Dialog Box
Quick Name Keys
Recall Files
Recall Dialog Box
Copy Files
Delete Files
Delete Dialog Box
File Menu Overview
File Menu
Save Menu
Save Location Menu
Save On ... Menu
Recall Menu
Copy Menu
Delete Menu
System Operations
Introduction
System Menu Overview
Application Options Menus
System Menu
Application Options Menu (VNA Mode)
Mode (Meas Gain Range) Menu (VNA Mode)
Application Options Menu (Field Mode)
Bias Tee Setup Menu (Field Mode)
Application Options Menu (SPA Mode)
Bias Tee Menu (SPA Mode)
System Options Menu
Display Settings Menu
Brightness Settings Menu
Reset Menu
System Options 2/2 Menu
Power–On Menu
Preset Menu
Power On Self Test
Firmware Update
GPS (Option 31)
Introduction
Activating the GPS Feature
Resetting GPS
Saving and Recalling Traces with GPS Information
Saving Traces with GPS Information
Recalling GPS Information
GPS Menu
Bias Tee (Option 10)
Overview
Anritsu Tool Box
Introduction
Software Installation
Anritsu Software Tool Box
Software Tools
Line Sweep Tools (LST)
Master Software Tools (MST)
easyMap Tools
Wireless Remote Tools
Supplemental Documentation
Introduction
Signal Standards
Introduction
Error Messages
Introduction
Reset Options
Reset Via Instrument Menus
Reset from OFF Condition
Self Test or Application Self Test Error Messages
Self Test
Application Self Test Results Window — VNA
Application Self Test (Vector Network Analyzer mode only)
Application Self Test Results Window — SPA
Operation Error Messages
Fan Failure
High Temp Warning
Operation not Permitted in Recall Mode
PMON PLD Fail
Power Supply
Error Saving File. General Error Saving File
Vector Network Analyzer Specific Warning Messages
Bias Tee cannot be enabled for start freq < 2MHz.
Bias Tee is not allowed for start freq < 2MHz.
Changing Source Power
No valid calibration to change correction.
Cannot continue with calculating.
Bias Tee state cannot be changed during calibration.
Turning Bias Tee to OFF.
Turning Bias Tee to OFF.
Calibration will be lost after change.
Changes not allowed during calibration.
Option 10 (Bias Tee) not enabled.
No External Reference signal detected.
Limit is not available for this Graph type.
Tower Mounted Amplifiers
Introduction
Coaxial Cable Technical Data
Coaxial Cable Technical Data
LAN and DHCP
Introduction
LAN Connection
Ethernet Configuration
Ethernet Menu
DHCP
ipconfig Tool
Ping Tool
Glossary of Terms
Introduction
Glossary Terms
VNA Master™ User Guide MS20xxB
Glossary of Terms