VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :CALCulate{1-16}[:SELected]:DATA Subsystem
 
:CALCulate{1-16}[:SELected]:DATA Subsystem
The :CALCulate{1-16}[:SELected]:DATA subsystem commands input and output various instrument information sets such as trace data and S-Parameters.
I/O Configuration and File Operation Subsystems
Related subsystems for I/O configuration and file operation are:
:CALCulate{1-16}:FORMat Subsystem – SnP Data
:CALCulate{1-16}:NXN Subsystem
:CALCulate{1-16}[:SELected]:DATA Subsystem
:CALCulate{1-16}[:SELected]:TDATA Subsystem
:FORMat Subsystem
:HCOPy Subsystem
:MMEMory Subsystem
Trace Subsystems
Related trace subsystems are:
:CALCulate{1-16}:PARameter and :PARameter{1-16} Subsystem
:CALCulate{1-16}[:SELected]:FORmat Subsystem
:CALCulate{1-16}:PARameter{1-16}:SELect Subsystem
:CALCulate{1-16}:PARameter{1-16}:COUPling Subsystem
:CALCulate{1-16}:POLar Subsystem
:CALCulate{1-16}:PROCessing:ORDer Subsystem
:CALCulate{1-16}[:SELected]:CONVersion Subsystem
:CALCulate{1-16}[:SELected]:DATA Subsystem
:CALCulate{1-16}[:SELected]:FORmat Subsystem
:CALCulate{1-16}[:SELected]:MATH Subsystem
:CALCulate{1-16}[:SELected]:MDATA Subsystem
:CALCulate{1-16}[:SELected]:SMITh Subsystem
:CALCulate{1-16}[:SELected]:SMOothing Subsystem
:CALCulate{1-16}[:SELected]:TRACE{1-16}:MARKer{1-12} Subsystem
:CALCulate{1-16}[:SELected]:TDATA Subsystem
:DISPlay Subsystem
:CALCulate{1-16}[:SELected]:DATA:FDATa <block>
:CALCulate{1-16}[:SELected]:DATA:FDATa?
Description
The instrument must be in Hold Sweep.
Sets formatted data to display on the active trace.
Returns formatted data of the active trace.
Cmd Parameters
<block> See definition of <block> or <arbitrary block>.
Query Parameters
<block> See definition of <block> or <arbitrary block>.
Range
NA
Default Value
NA
Syntax Example
:CALC1:DATA:FDAT <block>
:CALC1:DATA:FDAT?
:CALCulate{1-16}[:SELected]:DATA:FMEMory <block>
:CALCulate{1-16}[:SELected]:DATA:FMEMory?
Description
Sets formatted data to display on the active trace and writes it to trace memory. The command can also perform math functions.
Returns the formatted memory of the active trace.
Cmd Parameters
<block> See definition of <block> or <arbitrary block>.
Cmd Parameters
<block> See definition of <block> or <arbitrary block>.
Range
NA
Default Value
NA
Syntax Example
:CALC1:DATA:FMEM <block>
:CALC1:DATA:FMEM?
:CALCulate{1-16}[:SELected]:DATA:SDATa <block>
:CALCulate{1-16}[:SELected]:DATA:SDATa?
Description
Sets corrected real and imaginary S-parameter data to display on the active trace for the indicated channel. The data must be real and imaginary formatted data. The command converts the active trace display appropriately.
Returns the real/imaginary S-parameter data for the active trace on the indicated channel.
Cmd Parameters
<block> See definition of <block> or <arbitrary block>.
Query Parameters
<block>
Output
<block>
Range
NA
Default Value
NA
Syntax Example
:CALC1:DATA:SDAT <block>
:CALC1:DATA:SDAT?
:CALCulate{1-16}[:SELected]:DATA:SMEMory <block>
:CALCulate{1-16}[:SELected]:DATA:SMEMory?
Description
Sets corrected S-parameter trace memory to display on the active trace.
Returns corrected S-parameter trace memory of the active trace.
Cmd Parameters
<block> See definition of <block> or <arbitrary block>.
Query Parameters
<block> See definition of <block> or <arbitrary block>.
Range
NA
Default Value
NA
Syntax Example
:CALC1:DATA:SMEM <block>
:CALC1:DATA:SMEM?