:CALCulate{1-16}[:SELected]:FORmat Subsystem
The :CALCulate{1-16}[:SELected]:FORmat subsystem command configures the display type for the active trace on a per-channel basis.
Trace Subsystems
Related trace subsystems are:
:CALCulate{1-16}[:SELected]:FORMat <char>
:CALCulate{1-16}[:SELected]:FORMat?
Description
Sets the display format of the active trace on the indicated channel.
Returns the display format of the active trace on the indicated channel.
The available display types are:
• GDELay = Group Delay
• IMAGinar = Imaginary
• LINPHase = Linear Mag and Phase
• LOGPHase = Log Magnitude and Phase
• MLINear = Linear Magnitude
• MLOGarithmic = Log Magnitude
• PHASe = Phase
• PLINear = Linear Polar and Linear Phase
• PLINCOMPlex = Linear Polar and Real/Imaginary
• PLOGarithmic = Log Polar and Log Phase
• PLOGCOMPlex = Log Polar and Real/Imaginary
• PWRIn = Power In
• PWROut = Power Out
• REAL = Real
• REIMaginary = Real and Imaginary
• SADCOMPlex = Smith (G + jB) Admittance Real/Imaginary
• SADLINear = Smith (G + jB) Admittance Linear/Phase
• SADLOGarithmic = Smith (G + jB) Admittance Log/Phase
• SADMittance = Smith (G + jB) Admittance
• SADMLC = Smith (G + jB) Admittance L/C
• SCOMPlex = Smith (R + jX) Impedance Real/Imaginary
• SIMPLC = Smith (R + jX) Impedance L/C
• SLINear = Smith (R + jX) Impedance Linear/Phase
• SLOGarithmic = Smith (R + jX) Impedance Log/Phase
• SMITh = Smith (R + jX) Impedance
• SWR = SWR
• ZREAL = Impedance Real
• ZCOMPlex = Impedance Real and Imaginary
• ZIMAGinary = Impedance Imaginary
• ZMAGNitude = Impedance Magnitude
Cmd Parameters
<char> GDELay | IMAGinary | LINPHase | LOGPHase | MLINear | MLOGarithmic | PHASe | PLINear | PLINCOMPlex | PLOGarithmic | PLOGCOMPlex | PWRIn | PWROut | REAL | REIMaginary | SADCOMPlex | SADLINear | SADLOGarithmic | SADMittance | SADMLC | SCOMPlex | SIMPLC | SLINear | SLOGarithmic | SMITh | SWR | ZREAL | ZCOMPlex | ZIMAGinary | ZMAGNitude
Query Parameters
<char> GDEL | IMAG | LINPH | LOGPH | MLIN | GDEL | IMAG | LINPH | LOGPH | MLIN | MLOG | PHAS | PLIN | PLINCOMP | PLOG | PLOGCOMP | PWRI | PWRO | REAL | REIM | SADCOMP | SADLIN | SADLOG | SADM | SADMLC | SCOMP | SIMPLC | SLIN | SLOG | SMIT | SWR | ZREAL | ZCOMP | ZIMAG | ZMAGN
Range
NA
Default Value
SMIT
Syntax Example
:CALC1:FORM LOGPH
:CALC1:FORM?