VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :SENSe{1-16}:CORRection:COLLect:FULL4 Subsystem – 4-Port VNAs
 
:SENSe{1-16}:CORRection:COLLect:FULL4 Subsystem – 4-Port VNAs
The :SENSe{1-16}:CORRection:COLLect:FULL4 sets the calibration type to Full 4-Port Calibration for the indicated channel. The command requires a 4-port VNA instrument.
Calibration Subsystems with Actual Calibration
Related calibration subsystems that perform actual calibrations are:
• :SENSe{1-16}:ABORtcal Subsystem
• :SENSe{1-16}:CORRection:COLLect:CALB Subsystem – 4-Port VNAs
• :SENSe{1-16}:CORRection:COLLect:FLEXible Subsystem
• :SENSe{1-16}:CORRection:COLLect:FULL4 Subsystem – 4-Port VNAs
• :SENSe{1-16}:CORRection:COLLect:LRL[:CALa] Subsystem
• :SENSe{1-16}:CORRection:COLLect:PORT Subsystem
• :SENSe{1-16}:CORRection:COLLect[:CALa]:PORT Subsystem
:SENSe{1-16}:CORRection:COLLect:FULL4
Description
Sets the calibration type to Full Four Port for the indicated channel.
No query. To query the state of this command use:
:SENSe{1-16}:CORRection:COLLect:TYPe?
Cmd Parameters
NA
Range
NA
Default
NA
Syntax Example
:SENS1:CORR:COLL:FULL4