Backhaul Analyzer for Anritsu’s RF and Microwave Handheld Instruments
:
T1/FT1 Analyzer (Option 51 or 54)
T1/FT1 Analyzer (Option 51 or 54)
Introduction
Selecting the T1 Analyzer Mode
T1 Fundamentals
Network Equipment
T1 Display
Testing T1 Circuits
T1 Configuration Screen
Signal Setup
Payload Setup
T1 Pattern/Loop Screen
T1 Error/Alarm Screen
T1 Measurement Screen
Start/Stop Key
In‑service Measurements
Required Equipment
Measurement Setup Procedure
Vpp Measurement Procedure
VF, DS0 Test Procedure for In-service Measurements
Out‑of‑service Measurements
Required Equipment
Measurement Setup Procedure
Activate Remote Loop Up and Loop Down Code
To Set Errors/Alarms
Vpp and Frequency Measurement Procedure
BERT Measurement Procedure
Basic BERT Measurement Procedure
Quick Check
Histogram Display
To Insert Errors/Alarms
Event List
DS0 Testing
Measuring Clock and Frame Slips
Histogram Explanations
T1/FT1 Menus
Configuration Menu
Signal Setup
Payload Setup
Pattern/Loop Menu
Select Loop Code Menu
Error/Alarm Menu
Measurements Menu
BERT Menu
Histogram Menu
VF Menu
Calibrate Menu
Sweep Menu
Measure Menu
Trace Menu
Limit Menu
Other Menus
Introduction
This chapter provides a brief description of T1 circuits as well as T1 measurements, and also explains how to measure T1 performance using the instrument with Option 51 installed.